Table of Contents
Advertisement
Section 700 - Operation
Variable Mode
CPC-96, CPC-288, and CPC-576 All Versions
Description
Variable Mode allows you to use the soft keys on a display phone to access selected features when
your phone is in the following state:
•
While receiving intercom Dial Tone or during dialing - up to 10 functions
•
While receiving intercom ringback tone - up to 5 functions
•
While receiving intercom busy tone - up to 10 functions
•
While talking in intercom mode, during CO seizure, or during CO talk - up to 5 functions
Each extension may have customized soft key features available. The customization must be
programmed by the dealer.
To access the feature beside the soft key, simply press the associated soft key.
Operation
To enable Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key
3. Press the ON/OFF key.
To Execute a Variable Mode Function:
1. Press the NEXT or PREV keys on the large display tele-
phone or the up or down arrow keys on the small display
telephones until the desired function appears
2. Press the soft key next to the desired function
To cancel Variable Mode:
1. Press the ON/OFF key.
2. Press the Variable Mode FF key.
3. Press the ON/OFF key again.
576-13-700
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 5. Key Telephone Features
Result
AUTO FNC Mode displays
Programmed features display
Result
The variable mode function executes
Result
AUTO FNC Mode
displays
195
Advertisement
Table of Contents
