Table of Contents
Advertisement
Adjust the Focus
[Focus] tab
Note
The settings are different for different camera models. For details,
see the camera manual.
➀
➁
➂
➃
➀ [Not Specified]
Record using the existing focal position of the camera.
➁ [Auto] and [Auto (for domes)]
Automatically focus the image.
Use [Auto (for domes)] for cameras equipped with an
indoor dome housing. The setting prevents the camera
from focusing onto the dome surface.
➂ [Fixed at infinity]
Fix the focal point at infinity.
➃ [Manual]
Adjust the focus manually by clicking the [Far] or
[Near] button.
Click [One Shot AF] to focus once on the current
subject and then return to manual focus.
Record on a Regular Basis (Repeating Weekly Schedules)
Configure External Outputs
[External Outputs] tab
Enable or disable output to external devices registered on
the camera when the recording schedule starts.
➀ [Not Specified]
Disable the external output.
➁ [On]
Enable the external output.
Note
• You must first specify the external device settings on the
camera. For details, see the camera manual.
• The number of external outputs is different for different camera
models.
• The external outputs are enabled only during recording.
Hint
This feature can be used with sensor recording, motion detection
recording, intelligent function recording or volume detection
recording. For example, by connecting a buzzer to an external
output and enabling the output for motion detection recording,
the buzzer will sound when motion is detected.
➀
➁
87
5
Advertisement
Table of Contents
