Table of Contents
Advertisement
Configure the Viewer
Start the Viewer and configure it for day-to-day
operations. For details on how to start the Viewer, see
"Start the Viewer" (p. 39).
Display the [Viewer Settings] dialog box
Click [Settings] > [Viewer].
1
The [Viewer Settings] dialog box is displayed.
➀
➁
➀ [General] tab
Configure the Viewer screen display settings.
➁ [Event Notification] tab
Configure how the Viewer displays an event.
➂ [Event Display] tab
Specify the types of events to be displayed in the
Viewer.
➃ [OK] and [Cancel]
Close the dialog box.
➂
➃
Configure the Viewer Display and Operation
Settings
Click the [General] tab.
1
2
Configure each item.
➀
➁
➂
➃
➄
➅
➆
➀ [Maximum Live Frame Rate]
Specify the maximum live view frame rate.
➁ [Manual Recording Duration]
Specify the [Record Now] recording time, from 30 to
300 seconds.
➂ [Auto adjust frame rate under heavy load]
Automatically adjust the display frame rate.
➃ [Use large captions for video window title bars]
Increase the title bar text size of the video window.
➄ [Confirm when changing to full screen mode]
Display a confirmation message when switching to full
screen mode.
➅ [Prompt to save changes when layouts are closed]
Display a confirmation message when a layout in the
Viewer is closed. The message is not displayed if the
layout is not changed.
➆ [Timeout Before Ending]
Automatically stop two-way audio communication after
the specified period, from 1 to 60 minutes.
You can also specify 0 minutes. However, two-way
audio communication will not stop automatically in
such cases, so you must stop it manually. We
recommend setting an arbitrary timeout duration to
avoid unintentional continuation of audio
communication.
4
57
Advertisement
Table of Contents
