Canon RM-Lite Administrator's Manual page 123

Error Messages in the Viewer
Recording schedules
Special day schedules
Viewer window
Adding and editing a camera
Message
This schedule item overlaps a previously
scheduled item. Please check your settings and try
again.
Recording schedule items must be set at least 15
minutes long. Please check your settings and try
again.
Recording schedule items cannot be created for
the following cameras because of a clash with
existing schedules: <camera name>
Failed to create multiple recording schedule items.
All selected cameras have recording schedule
items that clash with a schedule time range.
At least one day must be selected. Please check
your settings and try again.
At least one recording mode must be selected.
Please check your settings and try again.
You cannot use digital zoom with "Current Camera
Position".
This schedule type has days set up for it to be
used on. These need to be removed before
deleting the schedule type.
This day has already been set as special day
schedule '<schedule name>'. Do you want to
delete the day from the special day schedule
'<schedule name>' and use it in this schedule?
Special day schedules cannot be set the end time
which is earlier than the start time.
A schedule with this name already exists.
Communication with the SSG "<storage server
group name>" has failed. To ensure that event and
video data are available from this SSG, identify and
resolve the problem and then press [OK] to
reconnect to the SSG. If you press [Cancel], then
some event data including all future events for
cameras recording to this SSG will not be
available.
Do you want to save changes to this layout?
Cannot save it in this folder.
This will replace an existing layout of the same
name. Are you sure you want to continue?
This layout cannot be saved using the same name
as an open layout. Please try again using a
different name.
Could not connect to camera. Please verify that the
host name, port number, user name and password
are correct.
Are you sure you want to remove the camera
'<camera name>'? If the camera is removed, you
will not be able to play back recorded video.
Cause
Recording schedules overlap.
Tried to set a schedule with a period shorter than
15 minutes.
Tried to drag a recording schedule window to add
multiple recording schedules, but one camera has
a conflicting schedule.
Tried to add a recording schedule to multiple
cameras using the [Edit Schedule Item] dialog
box, but the schedule time range clashes with
schedules that are already set on the cameras.
[OK] was clicked without specifying the day of the
week.
[OK] was clicked without selecting the check box
for a recording mode.
Tried to specify the electronic zoom range for the
VB-C60 or VB-M40 and close the [Edit Schedule
Item] dialog box with [Current Camera Position]
selected.
Tried to delete the special day schedule that has
scheduled days.
Tried to use dates that are already used for another
special day schedule.
Tried to register a schedule that goes past 24:00.
Tried to add a special day schedule with a name
that already exists.
A problem occurred when connecting to the
Storage Server to display a Viewer window.
Tried to close a layout that was modified.
The Windows folder or the Program Files folder
was specified as the destination folder for
snapshots.
Tried to save a layout sequence to a folder that
contains a layout or a layout sequence with the
same name.
Tried to save a layout using the same name as
another layout that is open in another tab or
window.
Could not connect to the camera.
Tried to delete a camera.
Error Messages
9
123