Before Starting Setup; Service Pack Support; Option Boards Supported By Expressbuilder - NEC express5800 A2010b User Manual
Hide thumbs
Also See for express5800 A2010b:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 3 Setup
1.
Before Starting Setup
Confirm the followings before starting setup.
You should setup the server hardware first.
1.1
Service Pack Support
EXPRESSBUILDER supports the following combination of operating system installation media and Service
Packs.
•
Windows Server 2012
－ OS Installation Media (No Service Pack)
•
Windows Server 2008 R2
－ OS Installation Media (No Service Pack) + Service Pack 1
－ OS Installation Media (Service Pack 1 Included)
1.2
Option Boards Supported by EXPRESSBUILDER
EXPRESSBUILDER supports the following option boards.
To connect any other option board than described below, refer to the instructions supplied with the board.
•
Option boards that EXPRESSBUILDER supports installation of OS
－ NE3303-173 RAID Controllr (6Gbps/512MB, RAID 0/1/5/6) (Internal)
－ NE3303-168 RAID Controller (6Gbps/1GB, RAID 0/1/5/6) (Internal)
•
Other option boards
－ NE3303-142 SAS Controller (6Gbps)
－ NE3303-H001 RAID Controller (6Gbps/1GB) (External)
－ NE3390-153 Fibre Channel Controller (1 port)
－ NE3390-154 Fibre Channel Controller (2 ports)
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
1. Before Starting Setup
249
Advertisement
Table of Contents
