Talking To Two Parties Alternately (Call Splitting) - Panasonic KX-NS1000 Operating Manual

•
If a call is parked automatically, confirm the parking zone number on the display.
•
If a call is not retrieved within a specified time, you will hear an alarm as a reminder (Call
Park Recall).
If an outside call is not answered within a specified time, it is automatically disconnected.
•
For SIP phone users: Any SIP phone user can retrieve a parked call, but only KX-
UT133/KX-UT136/KX-UT248/KX-UT670 SIP phone users can put a call into a parking zone.
•
The Call Park button light shows the current status as follows:
Flashing red (for PT): You or another extension has a call parked.
Flashing red (for KX-UT133/KX-UT136/KX-UT248/KX-UT670): Another extension has a
call parked.
Flashing green (for KX-UT133/KX-UT136/KX-UT248/KX-UT670): You have a call parked.
•
If you hear a reorder tone when retrieving a parked call, there is no held call. Confirm
the stored parking zone number.
•
After you park a call, you can perform other operations.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Call Park button or Call Park (Automatic Park Zone) button.

1.4.3 Talking to Two Parties Alternately (Call Splitting)

When talking to one party while the other party is on hold, you can swap the calls back and forth
(alternately).
•
KX-UT series SIP phone and S-PS users: You cannot leave the conversation and let the two
remaining parties talk.
To alternate between the parties leaving one party on hold temporarily
PT/PS/KX-UT series/S-PS
During a conversation
XFER
C.Tone
Press TRANSFER.
(DSS)
OR
extension no.
Press DSS or dial the other
party's extension number.
1.4.3 Talking to Two Parties Alternately (Call Splitting)
XFER
Talk to the
Press TRANSFER.
other party.
For KX-UT670:
Press Swap.
Talk to the
original party.
The other party will be on hold.
Operating Manual 71