GE Moisture monitor series 3 Programming Manual page 61

Setting Error Processing
(cont.)
Advanced Programming
Measurement Mode
O [H] T P Aux1
Table 3-8: Measurement Modes
Display Abbreviation
O
H
T
P
AUX1
AUX2
CNST-PPMV
System Menu
CONSTANT [ERROR]
Sel. ERROR Type
[LoRange] HiRange
Sel. ERR Response
[ALM-A] ALM-B
If you selected one of the ALARMS:
Sel. ERR Alarm
[IGNORE] TRIP
Refer back to the "Selecting Error Response" step to continue error
processing.
1
You must now select the type of
measurement the probe is
capable of taking. Use the arrow
keys to move to the desired
measurement mode and press
[YES].
See Table 3-8 below for a
list of available measurement
modes.
Measurement Mode
Oxygen
Hygrometry
Temperature
Pressure
Auxiliary 1
Auxiliary 2
PPMv Multiplication Factor
1
Use the arrow keys to move the
brackets to ERROR and press
[YES].
1
Use the arrow keys to move the
brackets to the desired selection
[YES]
and press .
1 Use the arrow keys to move the
brackets to the desired alarm or
recorder and press
1
Use the arrow keys to select
whether you wish to trip or
ignore the error and press
March 2008
[YES].
[YES].
3-33