Speaker Assembly - Panasonic SC-PT550 Operating Instructions Manual

Speaker assembly

Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
• For assembly, use a Phillips-head screwdriver.
• There is no difference between the right and left speakers and stands.
• For optional wall mount (\ page 10).
Make sure you have all the indicated components before starting assembly, setup, and connection.
*1
2 Front speakers
*2
2 Front speakers and
2 Surround speakers
*1
For Continental Europe, Australia and N.Z.
*2
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait
2
1
1
2
2
1
Position the cable
between the ridges.
Leave about 80 mm
Speaker assembly option
Thread the speaker cable through
the base.
Leave about 100 mm
You can remove and use the
cable from the stand. To reattach
the cable (\ page 10).
7 Preventing the speakers from falling
• You will need to obtain the appropriate screw eyes to
match the walls or pillars to which they are going to be
fastened.
• Consult a qualifi ed housing contractor concerning the
appropriate procedure when attaching to a concrete
wall or a surface that may not have strong enough
support. Improper attachment may result in damage to
the wall or speakers.
*1
2 Stands (with cable)
*2
4 Stands
• 2 x stands with short cables:
For front speakers
• 2 x stands with long cables:
For surround speakers
4
3
Tighten securely.
4
5
Press into the groove.
3
Attach the
speaker.
3
Rear of the speaker
*1
2 Bases
*2
4 Bases
5
Slide into the
groove.
Insert the wire fully.
+: White
−: Blue
Push!
Tighten securely.
2
Insert the wire fully.
+: White
−: Blue
Push!
Press into the groove.
1
Tighten securely.
String (not included)
Thread from the wall to the
speaker and tie tightly.
Screw eye
(not included) Wall
*1
8 Screws
*2
16 Screws
2
1
Approx.
150 mm
9
RQT8043