Advanced Play; Displaying Current Playback Condition / All Group, Program And Random Play - Panasonic SC-PT550 Operating Instructions Manual

Advanced play

Displaying current playback condition
Functions Menu
7 Basics
Example:
Playback condition
7 Details
Example:
Audio information
Subtitle information
Angle information
Aspect of current title
Total play time of
current title
• Video and audio information is not
displayed during search.
All group, Program and Random play
(during stop)
Program  Random  Off (Normal play)
All group (
To exit all group, program or random play mode
while stopped.
(several times)
• Selecting "Play as Data Disc" in Other Menu
(\ page 26) will be effective if the following functions
are not available to play WMA, MP3, JPEG, MPEG4
or DivX video contents.
• Some items cannot be played even if you
have programmed them.
• Some discs contain bonus groups. If a
password screen appears after selecting a group,
enter the password with the numeric buttons to play
the bonus group. Refer also to the disc's jacket.
All group play
20
RQT8043
 Basics  Details
(\ page 23)
Off (No on-screen display)
Current playback Elapsed
number play time
Play mode Current position
)
All Group Playback
Press PLAY to start
Program play (up to 32 items)
1
Press the numeric buttons to select the item.
(
register the selection.)
Example:
• Repeat this step to program other items.
• To select a 2-digit number
Example: To select 12,
2
To select an item using the cursor buttons
Press [ENTER] and [5, ∞] to select an item, then press
[ENTER] again to confi rm.
To select all the items
While the "Chapter", "Track" or
"Content" fi eld is highlighted, press
[5, ∞] to select "ALL".
Then press [ENTER] again to
confi rm.
To change the selected program
1. Press [5, ∞] to select the program number.
2. Press the numeric buttons to change each item.
(
confi rm the selection.)
To clear the selected program
1. Press [5, ∞] to select the program number.
2. Press [CANCEL] (or press [5, ∞, 2, 3] to select
"Clear" and press [ENTER]).
To clear the whole program
Select "Clear all" with [5, ∞, 2, 3] and press [ENTER].
The whole program is also cleared when the unit is
turned off, the disc tray is opened or another source is
selected.
Random play
1
Press the numeric buttons to select a group
or title. (
[ENTER] to register the selection.)
Example:
Discs which have multiple groups.
• To enter all groups, press [2, 3] to select "All" and
press [ENTER].
• To deselect a group, press numeric buttons
corresponding to the group you want to clear.
2
Press [ENTER] to
Example:
Press [ENTER] to
Press