Table of Contents
Advertisement
1
Front Panel
A
B
38 FADER REVERSE switches
CH-1 ON/OFF
When set to [ON], the top panel's CH-1 REVERSE indicator lights,
and the CH-1 fader lever operates in the reverse direction
(scale mark "0" becomes 0 dB attenuation, and "10" becomes
minus infinity). The fader start function also operates in reverse.
CH-2 ON/OFF
When set to [ON], the top panel's CH-2 REVERSE indicator lights,
and the CH-2 fader lever operates in the reverse direction
C
(scale mark "0" becomes 0 dB attenuation, and "10" becomes
minus infinity). The fader start function also operates in reverse.
C.F. ON/OFF
When set to [ON], the top panel's cross fader REVERSE indicator
lights, and the cross fader lever operates in the reverse direction
(left side becomes CH-2, and right side becomes CH-1).
The fader start function also operates in reverse.
39 FADER START selector switches
C.F.1 / CH-1
This switch determines whether the fader start operation for the
CD player connected to CH-1 is activated by the cross fader lever,
D
or by the CH-1 fader lever.
When the top panel's CH-1 FADER START button is set to On,
selecting [C.F.1] causes the top panel's C.F.1 FADER START
indicator to light, and selecting [CH-1] causes the top panel's CH-1
FADER START indicator to light.
C.F.2 / CH-2
This switch determines whether the fader start operation for the
CD player connected to CH-2 is activated by the cross fader lever,
or by the CH-2 fader lever.
When the top panel's CH-2 FADER START button is set to On,
selecting [C.F.2] causes the top panel's C.F.2 FADER START
indicator to light, and selecting [CH-2] causes the top panel's CH-2
FADER START indicator to light.
E
40 Headphone output jack (PHONES)
Accepts a 6.3 mm stereo headphones plug.
41 POWER switch
F
128
1
2
38
FADER REVERSE
CH-1
C.F.
CH-2
ON
ON
ON
PROFESSIONAL 2CHANNEL MIXER
OFF
OFF
OFF
CH-1
CROSS FADER 1
DJM-707
2
3
39
FADER START
C.F. 1 CH-1
DJM-707
FADER CURVE
CROSS FADER 2
CH-2
FADER CUT LAG
MIN
MAX
42
42 Fader attenuation dials (FADER CURVE)
CH-1
Use to adjust CH-1's fader attenuation curve.
CH-2
Use to adjust CH-2's fader attenuation curve.
CROSS FADER 1
Use to adjust cross fader's CH-1 attenuation curve.
CROSS FADER 2
Use to adjust cross fader's CH-2 attenuation curve.
FADER CUT LAG
Use to adjust mechanical play at both extremes of the cross fader
movement (the range in which lever movement produces no
effect).
3
4
PHONES
C.F. 2 CH-2
40
POWER
41
4
Advertisement
Table of Contents
