Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Packard Bell Vibe 500
Summary of Contents for Packard Bell Vibe 500
- Page 1 Packard Bell Vibe 500 Disassembly Manual...
-
Page 2: Table Of Contents
Avoid Electrostatic Discharge Power Supply Unit Opening the Casing Removing the Battery Removing the Top Cover Removing the LCD Panel Removing the Main Board Removing the HDD Removing the Button Panel Servicing the Touchpad Notice Packard Bell Vibe 500 Disassembly Manual... -
Page 3: Overview
Furthermore, the screws that are removed are shown next to the image of the parts themselves. Packard Bell reserves the right to make changes to the Vibe 500 MP3 player without notice. Technician Notes Only technicians authorized by NEC Computers International B.V. should attempt to repair this equipment. -
Page 4: Hazardous Voltage
Always return a defective power di modem. Non avviare il Vibe 500 senza supply to your dealer. aver prima messo a posto il coperchio. -
Page 5: Opening The Casing
2. Insert a coin (or use a small flat-bladed screwdriver) into the notch on the bottom of the player to open the player. Fig. 2 Small notch between cover and bottom. 3. Lift the top cover to separate it from the base. Fig. 3 Separating top cover and base. Packard Bell Vibe 500 Disassembly Manual... -
Page 6: Removing The Battery
Removing the LCD Panel To remove the LCD panel, open the player (see Opening the Casing), remove the battery (see Removing the Battery) and perform the following steps: 1. Disconnect the LCD panel flat cable. Packard Bell Vibe 500 Disassembly Manual... -
Page 7: Removing The Main Board
2. Push aside the side panels; the main board will pop out of the casing. 3. Gently lift the main board and fold it aside; the main board is still attached to the hard disk drive by means of a flat cable. Packard Bell Vibe 500 Disassembly Manual... -
Page 8: Removing The Hdd
Removing the Main Board up to step 3), then perform the following steps: 1. Remove the 3 screws from the metal hard disk drive bracket. Fig. 10 Location of the hard disk drive screws. Packard Bell Vibe 500 Disassembly Manual... -
Page 9: Removing The Button Panel
To remove the button panel, open the player (see Opening the Casing), remove the battery (see Removing the Battery), remove the top cover (see Removing the Top Cover), and continue with the following steps: Packard Bell Vibe 500 Disassembly Manual... -
Page 10: Servicing The Touchpad
1. Lift the white plastic clip and pull out the flat cable. Fig. 13 Disconnecting the flat cable from the touchpad. Note The touchpad contains the scrollbar and the 4 buttons integrated in the top cover (play/pause, menu, next and previous). Packard Bell Vibe 500 Disassembly Manual... -
Page 11: Notice
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. Copyright © 2005 NEC Computers International B.V. All rights reserved. Packard Bell is a trademark of NEC Computers International B.V. Company names and product names mentioned herein may be trade names, trademarks and/or registered trademarks of their respective owners.
Need help?
Do you have a question about the Vibe 500 and is the answer not in the manual?
Questions and answers