Rest (Resetting The Device) - ABB 8215 U-500 Operating Instructions Manual

Operating Instructions
Busch-AudioWorld
Pos: 66 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/P - R/Reset @ 21\mod_1331549724833_15.docx @ 202738 @ 3 @ 1
4.4.8

Rest (resetting the device)

Pos: 67 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/AudioVideo/Einstellungen Änderungsmenü/Reset - 8215 @ 21\mod_1331549246628_15.docx @ 202693 @ @ 1
Fig. 17:
To delete and then re-enter all the settings, the device must first be fully reset to its state at the point of delivery.
To do this, proceed as follows.
No. Function
1 Reset
- Press all four buttons on the device simultaneously.
- "RESET" flashes.
- Confirm with the Prog button.
- "YES" flashes.
- Confirm with the Prog button.
All settings of the device have now been reset. The SETUP menu will be displayed. Check all settings and
re-enter them, see chapter "Adjusting the device" on page 6.
Pos: 68 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
Operating Instructions | 1473-1-7955
®
reset
MENU
0
PROG
Operation
— 22 —