Battery Removal And Installation - Jungheinrich ERE 120 Operating Instructions Manual

5

Battery removal and installation

WARNING!
Accident risk during battery removal and installation
Due to the battery weight and acid there is a risk of trapping or scalding when the
battery is removed and installed.
Note the "Safety regulations for handling acid batteries" section in this chapter.
Wear safety shoes when removing and installing the battery.
Use only batteries with insulated cells and terminal connectors.
Park the truck on a level surface to prevent the battery from sliding out.
Make sure the crane slings have sufficient capacity to replace the battery.
Use only approved battery replacement devices (battery roller stand, replacement
trolley etc.).
Make sure the battery is securely located in the truck's battery compartment.
CAUTION!
Trapping hazard
There is a risk of trapping when you close the battery cover.
Make sure there is nothing between the battery cover and the truck when you close
the battery cover.
51