Sanyo PLC-XF40 Service Manual

Hide thumbs Also See for PLC-XF40:

Owner's manual (52 pages)

Specifications (1 page)

Service manual (94 pages)

Table of Contents

Quick Links

Download this manual See also: Owner's Manual

SERVICE MANUAL

PRODUCT CODE :

PLC-XF40

Downloaded from

www.Manualslib.com

Multimedia Projector

CONTENTS ;

Specifications

Safety Instructions

Protections

Ass'y lamp replacement

Mechanical disassemblies

Optical unit disassemblies

Troubleshooting

Waveforms

Electrical adjustments

Optical adjustments

CPU input/output port functions

The cautions in schematic diagrams

Unit PFC, Unit lamp ballast and IC block diagrams

Parts list

Cabinet, Chassis and Optical parts list

Electrical parts list

Schematic diagrams

Block diagrams

PWB parts location diagrams

MC8A

1 122 119 00

U.S.A. , Canada

PC8A

1 122 120 00

Continental Europe, Asia, Africa, M.E.

PC8C

1 122 120 02

U.K.

manuals search engine

PLC-XF40

MODEL NO.

U.S.A., Canada, Europe, Asia, Africa, M.E., U.K.

Chassis No. MC8-XF4000

NOTE: Match the Chassis No. on the rating

(Projection lens is optional.)

S1~S10

B1~B2

P1~P6

FILE NO.

sheet on the cabinet with the

Chassis No. in the Service Manual.

If the Original Version Service

Manual Chassis No. does not

match the unit's, additional

Service Literature is required. You

must refer to "Notices" to the

Original Service Manual prior to

servicing the unit.

Give complete "CHASSIS NO." for

parts order or servicing, it is shown on

the rating sheet on the cabinet of the

Projector.

REFERENCE NO.

5110318

Table of Contents

Need help?

Do you have a question about the PLC-XF40 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sanyo PLC-XF40

Page 1: Table Of Contents
FILE NO. SERVICE MANUAL PLC-XF40 MODEL NO. U.S.A., Canada, Europe, Asia, Africa, M.E., U.K. Multimedia Projector Chassis No. MC8-XF4000 NOTE: Match the Chassis No. on the rating sheet on the cabinet with the Chassis No. in the Service Manual. If the Original Version Service Manual Chassis No.
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS Projector Type Multi-media Projector Dimensions 22.9" x 10" x 30.9" (581 mm x 252 mm x 783 mm) (W x H x D) LCD Panel System 1.8" TFT Active Matrix type, 3 panels Panel Resolution 1024 x 768 dots Number of Pixels 2,359,296 (1024 x 768 x 3 panels) Color System...
Page 3 TECHNICAL SPECIFICATIONS Projector Type Multi-media Projector Dimensions 22.9" x 10" x 30.9" (581 mm x 252 mm x 783 mm) (W x H x D) LCD Panel System 1.8" TFT Active Matrix type, 3 panels Panel Resolution 1024 x 768 dots Number of Pixels 2,359,296 (1024 x 768 x 3 panels) Color System...
Page 4: Safety Instructions
Safety Instructions PRODUCT SAFETY NOTICE SAFETY PRECAUTIONS Product safety should be considered when a compo- nent replacement is made in any area of the projec- tor. Components indicated by mark in the parts WARNING: list and the schematic diagram designate compo- The chassis of this projector is isolated (COLD) from nents in which safety can be of special significance.
Page 5: Protections
Protections This projector is equipped with the following protec- tions to operate in safety. ❏ Fuse for circuit protection The fuse is located in the rear inside a projector. (Refer to figure.) When either the LAMP indicator or the READY indicator is not illuminated, fuse may be opened.
Page 6: Overheating Protection
❏ Overheating Protection The temperature monitor system -- The temperature monitor system is provided to prevents damage of optical components (the LCD panel and polarization film etc.) inside a projector from overheat. Two protection systems are provided. Each system operation as follows ; ----- The temperature monitor -1: ----- ----- The temperature monitor -2 : ----- (Temperature check of lamps.
Page 7: Lamp Replacement
LAMP REPLACEMENT Before Replacement This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects status of all lamps and shows status on screen or on LAMP REPLACE indicator.
Page 8 LAMP REPLACEMENT CAUTION CAUTION For continued safety, replace with a lamp Do not drop a lamp assembly or touch a glass assembly of same type. bulb! Glass can shatter and may cause injury. Allow a projector to cool for at least 45 minutes before you open Lamp Cover.
Page 9 Lamp counter reset Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting. Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SETTING Menu icon.
Page 10: Mechanical Disassemblies
Mechanical disassemblies Cabinet-front-top, Cabinet-front- bottom and Cabinet-front removal. Hook Note : Be careful not to damage Hook. The cabi- net-front-top is being fixed with cabinet- front-bottom by hook. 1. Remove 2 screws-A. Push part(a) and pull the Cabinet- front-top up. 2.
Page 11 Assembly Main removal. Remove the connectors and the flexible cables of the LCD panels from the assembly Main. (Never touch the elec- trode of flexible cables.) Remove 6 screws and remove the assembly main. Control-switch-unit and Terminal- slots-unit removal. 1. Remove the control-switch-unit upward. 2.
Page 12 Assemblies PFC, assembly power, assembly sub-power, assemblies lamp-ballast , assembly Motor & Audio and Fan(FN901) removal. 1. Remove 4 screws-A and remove the assembly motor & audio. 2. Remove 8 screws-B and remove the assembly PFC1-2 and assembly PFC3-4. 3. Remove 4 screws-C and remove the assembly power. 4.
Page 13 Fans( FN903, FN904, FN905, FN906 and Adjustable-feet removal. NOTE : Mark the Fans as they are removed from the cabinet bottom so that they may be reassembled in the same location from which they were removed. 1. Remove 6 screws-A and remove the adjustable-foot- left.
Page 14: Optical Unit Disassemblies
Optical unit disassemblies Projection lens and Holder-lens unit removal. 1. Turn 4 screws-A and remove the Projection lens. 2. Remove 4 screws-B and remove the Holder-lens unit. Integrator-lens-in unit, Integrator- lens-out/PBS unit, Condenser-lens unit, Relay-lens unit, Polarizer units and Fan( ) removal.
Page 15 Lamp -4 Assemblies lamp, cover mirror and optical base top removal. Lamp -2 Lamp -3 Lamp -1 Note : The characteristics and ages of lamps are managed by CPU. Mark the lamp assem- blies as they are removed from the optical Optical-base-top unit so that they may be reassembled in the same location from which they were...
Page 16 Remove 4 screws and remove the prism / LCD panel assembly. Prism / LCD panel assembly removal. At the time, be careful not to damage the prism / LCD panel assembly with the driver. Caution : (1). Never touch the LCD panel and prism part directly with hand.
Page 17: Optical Parts Location
Optical parts location --- The optical parts name(description) can see it on parts-list(page-66). -16- Downloaded from www.Manualslib.com manuals search engine...
Page 18 PWB assemblies location R-panel G-panel B-panel : Direction of a wind. Motor fans location -17- Downloaded from www.Manualslib.com manuals search engine...
Page 19: Troubleshooting
Troubleshooting NO PICTURE -1 ASS'Y MAIN TERMINAL BOARD DVI CHECK PSIG SIGNAL CHECK DATA IC6301 MEMORY SYNC SIGNAL IC6321 SGRAM IC6341 MEMORY IC2561 SGRAM IC2571 TO PRO. IC2581 TP-HV TP-32H1 SCAN TP-2561 MEMORY IC2591 CON- SGRAM TP-V TP-32V1 VERTER PSIG PSIG1~4 AUDIO INPUT...
Page 20 NO PICTURE -2 Troubleshooting Check the terminal board-DVI. Check the Vcc voltages. S9V / -5V / S6V (Always) 9V / 5VB (Switched) Check the test points. DATA H_DIF H_DIF K80A Digital V_DIF LATCH V_DIF DATA Interface DE_DIF DE_DIF IC8001 CLK_DIF CLK_DIF TP-80R TP-80G...
Page 21: Timing Chart
Check the terminal board-AV. Check the Vcc voltages. S9V / -5V / S6V (Always) 9V / 5VB (Switched) Check the test points. ASS'Y AV TP-3142 BNC-Y IC1181C K131 IC2161B Y/C-Y IC1141B IC141B IC141C NTSC-Y BNC-Y C.V.-Y VIDEO-Y NTSC C.V. PAL-Y IC2161A YCbCr YCbCr...
Page 22 * NO POWER -1 System Control Troubleshooting Is fuse (F901) blown? Isn't the lamp cover Is the lamp cover attached Fuse may be opened of a projector correctly? And has not the when either the LAMP removed? boss(Inner side of the lamp indicator or the READY cover) broken? indicator isn't Illuminated.
Page 23 * NO POWER-2 Troubleshooting Check the switching regulator. STR-Z2156 Switching regulator Caution : "HOT" Circuit ! If this Vcc voltage reaches to abnormal voltage (exceeds 22V), the IC632 will be shut down. If a temperature of this frame reaches to 150˚C, Check the signal at pin 5 the IC632 will be shut of T621.
Page 24: Audio System
No sound Troubleshooting Audio system Terminal board ASS'Y CGMOTHER - DVI ASS'Y_MAIN SLOT_1 K90C ASS'Y_RS232C K80H Terminal board - Component K38F K38E SLOT_2 K90D AUDIO_AMP. IC1871 K90K AUDIO_CONTROL K16B K10H L-OUT Terminal board R-OUT - AV SLOT_3 K90E IC001 K16F IC801 IC1851 K16A...
Page 25: Lamp Abnormality
LAMP ABNORMALITY -1 System Control Troubleshooting NOTE : ■ The lamp emits light through arc discharge. To initiate arc discharge, dielectric breakdown must occur between the lamp electrodes. The high-voltage pulse generator generates and applies high- voltage pulses with peak values of about 20kV between the lamp electrodes in order to generate glow discharge.
Page 26 LAMP ABNORMALITY -2 Troubleshooting Check the unit P.F.C.. Has not the temperature switch operated? Check! If the temperature around Caution : "HOT" Circuit ! FET reaches 85 degrees, the PFC circuit will be shut down. OUTPUT DC 380V~400V Check! UNIT PFC U20B34600 LAMP CN1B...
Page 27: Power Lens System Abnormality
POWER LENS SYSTEM ABNORMALITY Troubleshooting Motor-driven lens system. (Zoom, Focus and lens shift.) LEFT DET. CENTER DET. Horizontal shift function does not exist RIGHT DET. in some particular models. Therefore IC1621, K8N, etc. do not exist in those models. K16A K16H TOP DET.
Page 28: Temperature Abnormality
TEMPERATURE ABNORMALITY -1 Temperature sensors location can see it on "protections"( page-5). System Control Troubleshooting NOTE : Temperature monitor operation. TURE WARNING indicator at intervals of 0.6 seconds. Cooling fans operate until temperature ■ The temperature monitor system is provided to prevents damage of optical components (the returns to normal.
Page 29 TEMPERATURE ABNORMALITY -2 Troubleshooting Check the fan control circuit CHECK ! CHECK ! ● BUFFER FAN DRIVE ● OUTPUT ON/OFF SIGNAL From pin4 of IC6611 H : ON L : OFF VOLTAGE ● VOLTAGE CONTROL OUT CONTROL SIGNAL From IC6611 CHECK ! CHECK ! -32-...
Page 30: Waveforms
Waveforms Timing chart 1 0 u s / D i v Terminal board-AV Video-in NTSC 0.5V/Div TP_32H1 H_sync 2V/Div TP_5101 0.5V/Div TP_5102 0.5V/Div TP_3141 C 0.5V/Div TP_3142 0.5V/Div TP_5181 TP_2301R 0.5V/Div 0 . 5 V / p _ p TP_201 TP_820R 0.5V/Div 0.5V/Div...
Page 31 Timing chart 5 u s / D i v TP_2561 TP_2571 PSIG Red LCD panel drive signal 5V/Div Green LCD panel drive signal TP_2527 TP_2526 5V/Div 5V/Div Blue LCD panel drive signal 5V/Div 2 m s / D i v Input_signal NTSC 0.5V/Div TP_32V1...
Page 32: Alignment Procedures
Alignment procedures Service adjustment menu operation Normal Mode Service Mode ■ To enter the "service mode." "MENU" Service Mode "IMAGE" Group Data To enter the service mode, press the "MENU" and "IMAGE" buttons on the projector simultaneously and hold for 2 sec- "POWER onds.
Page 33: Service Mode Adjustment Menu
■ Service mode adjustment Menu Adjustment Mode Adjustment Item Group-no. Not designated Component ● 140-0 Fans-A driving voltage adjustment ● 140-1 Fans-A driving voltage adjustment ● 140-2 Fans-C driving voltage adjustment ● 140-3 Fans-C driving voltage adjustment ● 140-4 Fans-B driving voltage adjustment ●...
Page 34: Adjustment Mode
Adjustment Mode Adjustment Item Group-no. Not designated Component ● 210-14 & 16 AV White balance adjustment. 4 lamp mode ● 200-14 & 16 PC White balance adjustment. 4 lamp mode ● 211-14 & 16 AV White balance adjustment. Lamp 1-4 of 2 lamp mode ●...
Page 35: Electrical Adjustments
■ Electrical adjustments 1. Voltage adjustment Note : Equipment Digital voltmeter ■ The following adjustment is the adjustment item for Assembly power. Connections + K6D(2) The test point exists on the Assembly power. - chassis ground Voltage adjustment. Adjustment: Adjust the voltage of K6D to 6.35± 0.05V DC with the VR652. ■...
Page 36 3. The voltage check of the 3D-Noise-reduction-PLL circuit. 5. Component Video signal adjustments Equipment Digital voltmeter Connections : + TP5103/ - chassis ground. Equipment Oscilloscope. Input mode Input mode Y, Cb, Cr. Input signal Color bar signal(PAL) Input signal 16 step gray scale signal Picture condition Normal Picture condition...
Page 37 6. Fan driving voltage adjustments 9. Pedestal level adjustments -PC Equipment Digital voltmeter. Equipment Oscilloscope. Input mode Computer. Set the image to "Service mode." Input signal 16 step gray scale signal Adjust each item for below values with the Volume + and - buttons. Set the image to "Service mode."...
Page 38 11. Pedestal level adjustments AV 13. Panel driving signal adjustments -AV Equipment Oscilloscope. Equipment Oscilloscope. Input mode Input mode Input signal 16 step gray scale signal Input signal 16 step gray scale signal Set the image to "Service mode." Picture condition Normal.
Page 39 15. Flicker reduction Input mode Computer. Input signal 1 dot line computer signal Set the image to "Service mode." Adjust each color for minimum flickers with the Volume + - buttons. Group Screen 200- Display only green light. 200- Display only red light. 200- Display only blue light.
Page 40: Optical Adjustments
Optical components adjustments Integrator lens out adjustment Prism PBS Condenser lens adjustment adjustment Focus of LCD panel adjustment Integrator lens in adjustment Polarizer adjustment Relay lens ■ Adjustment optical components location adjustment ■ Before Adjustment 1. Each adjustment requires ball allen wrenches set and slot screwdrivers set. 2.
Page 41 ■ Focus of LCD Panel Adjustment SCREW-A SCREW-A SLOT-B Prism / LCD Panel assembly SCREW-A SCREW-A Before Adjustment : 1. Turn on a projector. 2. Set the image to "service mode" and project a green grid pattern on a screen. And adjust green grid pattern to sharp focus, pressing Focus(▲)(▼) buttons on the projector or remote control unit.
Page 42 ■ Integrator-lens-in adjustment-1 Before Adjustment : * Remove the flexible cables of LCD panels from SLOT-B the assembly Main. And turn on the projector. SCREW-A * Shift the adjustment position of Integrator-lens- out temporarily until shade appears the right or the left on the screen.
Page 43 ■ Integrator-lens-in adjustment-2 SCREW-A SCREW-B SCREW-A Before Adjustment : 1. Remove the flexible cables of LCD panels from the assembly Main. And turn on the projector. 2. Insert light block sheets in front of the Red and Blue panels to block the red and blue lights so that green light is project- 3.
Page 44 ■ Condenser-lens adjustment Before Adjustment : 1. Remove the connector K8E, connector K8N, connector SCREWS-A K8P and the flexible cables of LCD panels from the SLOT-B SCREWS-A assembly Main. And turn on the projector. 2. Insert light block sheet in front of the blue panel to block the blue light so that yellow light is pro- (Green and Red lights)
Page 45 ■ Prism P.B.S. adjustment SLOT-A Adjustment : 1. Remove the flexible cables of LCD panels from the SCREW-B assembly Main. And turn on the projector. 2. Loosen two screws-B. 3. Insert a slot screwdriver into slot-A, turn it and adjust the center position of screen to maximum brightness.
Page 46 CPU and I/O-Expander Control port functions CPU (IC801 144 pin) Control port functions Name Function Name Function Polarity Pin No. PA23/WRHH USB RESET USB Reset signal Active L PE14/TIOC4C/DACK0/AH PA22/WRHL PA21/CASHH RS232C_SW RS232C Output select signal PE15/TIOC4D/DACK1/IRQOUT POWER SW "L":Power OFF "H":Power ON PC0/A0 ADDRESS0 Address Bus 0...
Page 47 CPU and I/O-Expander Control port functions Name Function Name Function Polarity Pin No. PD16/D16/IRQ0 PW_PG_SEL PW365 232C Write SW(SH="H",PIXEL="L") PD15/D15 DATA15 Data Bus 15 PD14/D14 DATA14 Data Bus 14 PD13/D13 DATA13 Data Bus 13 PD12/D12 DATA12 Data Bus 12 PD11/D11 DATA11 Data Bus 11 PD10/D10...
Page 48 CPU and I/O-Expander Control port functions I/O Expander Control port functions (IC1801 64 pin) Name Function Name Function Polarity Pin No. BLAST_SW3 Lamp Ballast 3 On/Off SW * ON = H BLAST_SW4 Lamp Ballast 4 On/Off SW * ON = H 5V ±10% LENS_UP Lens Up...
Page 49 CPU and I/O-Expander Control port functions Output Expander Control port functions (IC1822 20 pin) Name Function Name Function Polarity Pin No. EXP_RST SCONFIG Single to Dual converter Enhancer CONFIG Signal Data Bus 0 Data Bus 1 IP_RESET IP_RESET PROGRAM PROGRAM Data Bus 2 Data Bus 3 USB_BRST...
Page 50: The Cautions In Schematic Diagrams
The cautions in schematic diagrams ■ 1. PRODUCT SAFETY NOTICE COMPONENTS DESIGNATED BY A MARK ( ) IN THIS SCHEMATIC DIAGRAM DESIGNATE COMPONENTS WHOSE VALUES ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY. SHOULD ANY COMPONENT DESIGNATED BY A MARK NEED TO BE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTS LIST.
Page 51 The cautions in schematic diagrams Read description in the Capacitor and Resister as follows: CAPACITOR 16 K K 0.47 BA Characteristic Rated value Tolerance Symbols Static capacitance of 10PF or less Material : Nondesignated ±0.1PF CERAMIC Temperature compensating ceramic ±0.25PF CERAMIC High dielectric rate ceramic ±0.5PF...
Page 52: Unit Pfc, Unit Lamp Ballast And Ic Block Diagrams
UNIT P.F.C., UNIT LAMP BALLAST and IC BLOCK DIAGRAMS UNIT P.F.C. OUTPUT DC 380V~400V UNIT PFC U20B34600 LAMP CN1B BALLAST-1 CN3B PFC-1 AC-INPUT AC 90V~264V BALLAST-1 ON/OFF CONTROL LAMP-1 MONITOR TEMP. SW 85˚C LAMP BALLAST-2 CN4B PFC-2 TEMP. SW 12V (+B) BALLAST-2 ON/OFF RL12 CONTROL...
Page 53 STR-Z2156 Switching regulator G (H) T621 D655 PROTECTION ABNORMAL ABNORMAL START TEMP. DET. VOL. DET. D651 DELAY LATCH LOGIC D652 OC-RC CONTROL 6.25V CONT G (L) VOLTAGE CONTROL PC611 IC652 PC612 ABNORMAL VOLTAGE DETECT <FF> FA7612CN PWM POWER CONTROL ON/OFF ●...
Page 54 LB1641/1645N MOTOR DRIVER LB1645N LB1641 INPUT ON/OFF CONTROL INPUT S1=ON , OTHER=OFF FORWARD (reverse) DRIVE S2=ON , OTHER=OFF REVERSE (forward) DRIVE S3=ON , OTHER=OFF BRAKING <FF> MPXA4115A SMALL OUTLINE Pressure sensor for altimeter PACKAGE PPXA4115A CASE 482–01 <FF> FLUORO SILICONE STAINLESS GEL DIE COAT STEEL CAP...
Page 55 CXD3511Q DIGITAL SIGNAL DRIVER DSD BLOCK DATA BUS USER USER R, G, B, IN SWITCH GAIN BRIGHT GAIN BRIGHT GAIN YS, YM, R, G, B, OSD UNEVEN PATTERN GAMMA MUTE 1 COLOR BRIGHT GENERATOR CORRECTION CORRECTION POST POST CYCLE DELAY MUTE 2 LIMITER GAIN...
Page 56 CXA3562R LCD DRIVER <FF> -59- Downloaded from www.Manualslib.com manuals search engine...
Page 57: Parts List
Parts list ■ PRODUCT SAFETY NOTICE Product safety should be considered when a component replacement is made in any Note: area of a Projector. Components indicated by a mark in this parts list and the Part order must contain Chassis No., Part schematic diagram show components whose value have special significance to product No., and descriptions.
Page 58 Read description in the Capacitor and Resister as follows: CAPACITOR CERAMIC 100P K 50V Rated Voltage Tolerance Symbols Rated value: P=Pico farad, U=Micro farad Static capacitance of 10PF or less Nondesignated Material : ±0.1PF CERAMIC Temperature compensating ceramic ±0.25PF ±0.5PF High dielectric rate ceramic ±1PF Semiconductor ceramic...
Page 59 PWB assemblies location R-panel G-panel B-panel : Direction of a wind. Motor fans location -62- Downloaded from www.Manualslib.com manuals search engine...
Page 60 : Refer to lens instruction manual. 51-B 51-B 51-B 51-A 51-B 51-B 51-B 51-A 92 x 7 92 x 3 92 x 10 129-A Cabinet Chassis -63- Downloaded from www.Manualslib.com manuals search engine...
Page 61 Prism / LCD panel assembly Optics 120 (R) 117 (R) 121 (G) 118 (G) 122 (B) 119 (B) A : Printed mark comes this side. B : Plane surface comes this side. C : Coated surface comes this side. D : Spherical surface comes this side. E : Slot part comes this top side.
Page 62 SPRING COIL-M6MA 610 285 1366 SPRING COIL-MJ6A 610 289 1829 BADGE V MARK L-ML6A ****************************************************** ******************************************************** CHASSIS PARTS 006MC8A SANYO - 610 297 3884 COMPL,HOLDER LNS B-MJ6A 51-A. 645 042 7343 ASSY,MOTOR(ML6A) 51-B. 645 012 2422 SWITCH,LEVER 610 282 9846...
Page 63: Electrical Parts List
Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description 405 163 1701 TR 2SC2812N-L7-TB0 ******************************************************** INTEGRATED CIRCUIT IC001 409 017 7208 IC LA4261 IC1601 409 114 4803 IC LB1641 Out of PWB assembly IC1611 409 114 4803 IC LB1641 COIL IC1621...
Page 64 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description D1611 407 206 6308 ZD UDZS-TE-175.1B 405 002 6706 TR 2SA1179-M6-TB D1612 407 149 0807 DIODE 1SS355-TE-17 405 002 6904 TR 2SA1179-M7-TB D1613 407 149 0807 DIODE 1SS355-TE-17 405 163 1503 TR 2SA1179N-M6-TB D1621...
Page 65 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description ******************************************************** RESISTOR R9600 401 105 7909 MT-GLAZE 0.000 ZA 1/16W ASSY,PWB,REAR LED ML6A R9601 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R9602 401 105 7909 MT-GLAZE 0.000 ZA 1/16W 610 286 8470 ASSY,PWB,REAR LED ML6A R9605...
Page 66 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description Q1164 405 134 5905 TR 2SA1037AK-T146-R 405 014 4608 TR 2SC2412K T146 S 405 147 2205 TR 2SA1037AK-S-T146 405 015 8704 TR 2SC2812-L6-TB 405 002 0308 TR 2SA1037K T146 R 405 015 8902 TR 2SC2812-L7-TB 405 002 0407...
Page 67 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description 405 163 1602 TR 2SC2812N-L6-TB0 C1152 403 283 6309 CERAMIC 1U Z 405 163 1701 TR 2SC2812N-L7-TB0 C1161 403 283 6309 CERAMIC 1U Z Q5105 405 014 4509 TR 2SC2412K T146 R C1162 403 145 9905...
Page 68 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C3135 403 164 0204 CERAMIC 0.1U Z C5129 403 155 1609 CERAMIC 33P J C3136 403 164 0204 CERAMIC 0.1U Z C5130 403 157 1706 CERAMIC 8P D C3137 403 164 0204 CERAMIC...
Page 69 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R133 401 226 1206 MT-GLAZE 150 FA 1/16W R2191 401 105 0504 MT-GLAZE 1K JA 1/16W R134 401 226 1206 MT-GLAZE 150 FA 1/16W R2192 401 105 0504 MT-GLAZE 1K JA 1/16W R147...
Page 70 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R5102 401 105 0504 MT-GLAZE 1K JA 1/16W D133 407 209 1201 ZD UDZS-TE-176.2B R5103 401 105 0702 MT-GLAZE 100K JA 1/16W D134 407 209 1201 ZD UDZS-TE-176.2B R5104 401 105 4205 MT-GLAZE...
Page 71 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description IC7141 409 484 2003 IC BA7078AF-E2 R7124 401 105 4502 MT-GLAZE 390 JA 1/16W IC7142 410 343 7008 IC SN74AHCT1G14DBVR R7127 401 105 0504 MT-GLAZE 1K JA 1/16W IC7143 410 343 7008 IC SN74AHCT1G14DBVR...
Page 72 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description L7208 645 014 2659 FILTER,EMI 10MHZ Q9012 405 047 9007 TR 2SB1204-S-TL L7209 645 014 2659 FILTER,EMI 10MHZ 405 047 9106 TR 2SB1204-T-TL DIODE Q9013 405 014 4509 TR 2SC2412K T146 R D7101 407 209 1201...
Page 73 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C9035 403 175 4505 ELECT 47U M 6.3V R9043 401 105 0702 MT-GLAZE 100K JA 1/16W C9037 403 157 1904 CERAMIC 10P D R9044 401 105 0405 MT-GLAZE 100 JA 1/16W C9038...
Page 74 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R9161 401 105 0603 MT-GLAZE 10K JA 1/16W C3867 403 283 6309 CERAMIC 1U Z R9166 401 105 3307 MT-GLAZE 2.7K JA 1/16W RESISTOR R9167 401 105 1501 MT-GLAZE 1.5K JA 1/16W R3851...
Page 75 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description K58A 645 012 2248 PLUG,4P D651A 610 292 3223 HEAT SINK-D MV6A D651B 411 047 0104 SCR PAN+SW+W 3X8 ******************************************************** D652 407 164 2206 DIODE FMB-24L ASSY,PWB,POWER MJ6A D652B 411 047 0104 SCR PAN+SW+W 3X8...
Page 76 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description Q6633 405 014 4509 TR 2SC2412K T146 R R6604 401 105 2201 MT-GLAZE 180K JA 1/16W 405 014 4608 TR 2SC2412K T146 S R6605 401 105 5301 MT-GLAZE 4.7K JA 1/16W 405 015 8704...
Page 77 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description L7601 645 007 7968 INDUCTOR,10U M R2652 401 105 0603 MT-GLAZE 10K JA 1/16W DIODE R2653 401 105 0603 MT-GLAZE 10K JA 1/16W DL6601 407 042 7309 LED TLR144 DIODE DZ6609...
Page 78 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description IC8182 409 404 6302 IC M62320FP C8192 403 113 3805 CERAMIC 1000P K IC8191 409 505 6102 IC MD1222N C8193 403 358 1307 ELECT 330U M IC8193 409 487 5803 IC 24C01CT/SN C8194...
Page 79 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R8083 401 105 4502 MT-GLAZE 390 JA 1/16W D8092 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R8085 401 105 0504 MT-GLAZE 1K JA 1/16W D8093 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R8086 401 105 7909...
Page 80 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description 405 015 8902 TR 2SC2812-L7-TB C1066 403 149 9208 CERAMIC 0.01U Z 405 163 1602 TR 2SC2812N-L6-TB0 C1069 403 162 6208 ELECT 1U M 405 163 1701 TR 2SC2812N-L7-TB0 C1071 403 162 6208...
Page 81 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C3082 403 157 1904 CERAMIC 10P D R2043 401 105 5301 MT-GLAZE 4.7K JA 1/16W C3083 403 157 1508 CERAMIC 3P C R2044 401 105 2805 MT-GLAZE 2.2K JA 1/16W C3084 403 157 1904...
Page 82 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description L3004 645 014 2659 FILTER,EMI 10MHZ 405 015 8902 TR 2SC2812-L7-TB L3005 645 014 2659 FILTER,EMI 10MHZ 405 163 1602 TR 2SC2812N-L6-TB0 L3006 645 014 2659 FILTER,EMI 10MHZ 405 163 1701 TR 2SC2812N-L7-TB0 L3007...
Page 83 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description 409 486 7709 IC LM7171BIMX IC872 410 365 5600 IC SN74LVCC4245APWR IC2591 409 390 0001 IC LM7171AIMX IC873 410 365 5600 IC SN74LVCC4245APWR 409 486 7709 IC LM7171BIMX IC874 410 311 5708 IC MC74HCT244ADT...
Page 84 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C2336 403 164 0204 CERAMIC 0.1U Z C3237 403 164 0204 CERAMIC 0.1U Z C2338 403 164 0204 CERAMIC 0.1U Z C3239 403 164 0204 CERAMIC 0.1U Z C234 403 164 0204 CERAMIC...
Page 85 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C4236 403 164 0204 CERAMIC 0.1U Z C6307 403 164 0204 CERAMIC 0.1U Z C4237 403 155 1609 CERAMIC 33P J C6308 403 164 0204 CERAMIC 0.1U Z C4238 403 157 7302 CERAMIC...
Page 86 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description C9807 403 164 0204 CERAMIC 0.1U Z R1332 401 105 7909 MT-GLAZE 0.000 ZA 1/16W C9809 403 164 0204 CERAMIC 0.1U Z R1334 401 105 0603 MT-GLAZE 10K JA 1/16W C9811 403 280 0805...
Page 87 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R205 401 105 0504 MT-GLAZE 1K JA 1/16W R2460 401 105 0504 MT-GLAZE 1K JA 1/16W R208 401 105 3901 MT-GLAZE 33 JA 1/16W R2462 401 105 5905 MT-GLAZE 560 JA 1/16W R211...
Page 88 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R3255 401 105 0405 MT-GLAZE 100 JA 1/16W R3438 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R3256 401 105 0405 MT-GLAZE 100 JA 1/16W R3439 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R3257...
Page 89 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R3574 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R4869 401 105 2003 MT-GLAZE 1.8K JA 1/16W R3575 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R487 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R3576...
Page 90 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R577 401 105 1402 MT-GLAZE 150 JA 1/16W R7331 401 105 2607 MT-GLAZE 22 JA 1/16W R578 401 105 3208 MT-GLAZE 270 JA 1/16W R7332 401 105 2607 MT-GLAZE 22 JA 1/16W R579...
Page 91 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description R809 401 105 0405 MT-GLAZE 100 JA 1/16W R9801 401 105 1501 MT-GLAZE 1.5K JA 1/16W R810 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R9803 401 105 8005 MT-GLAZE 1M JA 1/16W R812...
Page 92 Electrical Parts List Ref. No. Part No. Description Ref. No. Part No. Description TPRXDPW 645 036 4266 TERMINAL TPSINTR 645 036 4266 TERMINAL TPTXDPW 645 036 4266 TERMINAL 645 036 5010 TERMINAL TPVCG 645 036 4266 TERMINAL TP1351 645 036 5010 TERMINAL TP1352 645 036 5010...
Page 93 645 003 1137 CORD,POWER-3.0MK,UK 645 040 7871 CORD,POWER-3.0MK,USA 645 030 6624 CABLE,INTERFACE VGA 645 039 7196 CABLE,MOUSE MAC 645 039 7202 CABLE,MOUSE PS/2 645 039 7219 CABLE,MOUSE SRAL 645 043 3702 CABLE,DVI-D ******************************************************** SANYO - -97- Downloaded from www.Manualslib.com manuals search engine...
Page 94 Feb. / 2002 Printed in Japan SANYO Electric Co., Ltd Downloaded from www.Manualslib.com manuals search engine...

Sanyo PLC-XF40 Service Manual

Quick Links

SERVICE MANUAL

Need help?

Questions and answers

Related Manuals for Sanyo PLC-XF40

Summary of Contents for Sanyo PLC-XF40

Table of Contents