Playing Back Recorded Images Via Front Panel Control; Select A View; Searching Recorded Image Using A Specific Date/Time - JVC VR-N900U Startup Manual

Playing Back Recorded
Images via Front Panel
Control
This section describes the procedures for viewing recorded
images using the front panel of this unit.
[LIVE/BROWSE] Button/Indicator
Keypad/Indicator
[SEARCH] Button
[ZOOM IN/ENTER] Button
[ZOOM OUT/CANCEL] Button
[PTZ/PRESET] Button/Indicator
Displaying the [Browse] Screen
1
Press the [LIVE/BROWSE] button when the
wallpaper or main menu screen is displayed
● The NVR Viewer starts up and the [Live] screen appears.
2
When the [Live] screen appears, press the
[LIVE/BROWSE] button again
● Press the button to toggle between the [Live] and [Browse]
screens.
[Live] Screen
[STOP(PB)] Button
[SKIP] Button
NVR Viewer
[Browse] Screen

Select a view

For details on the view settings, refer to
[INSTRUCRTIONS].
1
Press the [PTZ/PRESET] button so that the [PTZ/
PRESET] indicator starts to blink
● The [PTZ/PRESET] indicator switches between lit and
blinking each time the [PTZ/PRESET] button is pressed.
2
Press the [ZOOM IN/ENTER] and [ZOOM OUT/
CANCEL] buttons to select a view
Note :
● Do not switch the view frequently within a short time interval.
● When live images do not appear on VN-C625U/VN-C655U, set
the password for connecting VN-C625U/VN-C655U on the
camera unit as well as this unit again. For details on the setting
procedures, refer to the [INSTRUCRTIONS] of the camera in
use and procedures for setting the root password on the [Edit
device settings] screen in this manual .
● Setting of the [Audio] section is restored to ANo Audio SourcesB
when you return from the setting screen to [Browse]. Select the
parameters again.
Searching Recorded Image Using a
Specific Date/Time
You can search for and play back images by specifying a date
and time using the [SEARCH] button on the front panel.
1
Press the [SEARCH] button on the [Browse]
screen
● The date and time input screen appears.
2
Use the keypad to enter the search date and
time
● Use the [SKIP] button (S or T) to select an item and
input accordingly.
3
Press the [ZOOM IN/ENTER] button
● The view in the image display screen on the right jumps to
the selected date and time.
Memo :
● You can also jump to the selected date/time by clicking the [Go
To] button.
● When you are using the software keyboard, click the [Go To]
button.
[Go To] Button
17