Chapter 5. On-Screen Display Menu Controls; Navigating The Osd - Lenovo C500 User Manual

Chapter 5. On-Screen Display menu controls

This projector has an on-screen display (OSD) that lets you make image adjustments and change various
settings.
Note: You must have a display on the screen in order to access the OSD.

Navigating the OSD

You can use the remote control or the buttons on the top of the projector to navigate and make changes
to the OSD. The following sections show the menus in the OSD.
1
2
3
1 Menu
2 Left cursor
3 Down cursor
4 Right cursor
5 Up cursor
6 Enter
To access the OSD menus, do the following:
1. To open the OSD, press the Menu button.
2. There are six menus. Press the left or right cursor buttons to move though the menus.
3. Press the up or down cursor button to move up and down in a menu.
4. Press the left or right cursor button to change values for settings.
5. Press the up or down cursor button to select a different sub-menu item for change.
6. If you wish to cancel all changes made within a sub-menu, select Cancel and press the Enter button.
7. Press Menu to confirm the new setting and leave the sub-menu, or to close the OSD from the main
menu screen.
© Lenovo 2006. Portions © IBM Corp. 2004.
Downloaded From projector-manual.com Lenovo Manuals
Power Auto
Source Freeze Blan k Blan k
Menu Enter
Volume K eystone
Mute
1
2
Opens and closes the OSD.
Navigates and changes settings in the OSD menus.
Navigates and changes settings in the OSD menus.
Navigates and changes settings in the OSD menus.
Navigates and changes settings in the OSD menus.
Changes OSD settings.
3 2 5 6
6
5
4
4
READY POWER
POWER POWER
SOURCE SOURCE
AUTO AUTO
MENU MENU
1
5-1