Inserting The Remote Control Batteries - Lenovo C500 User Manual

6 Enter
7 Up cursor
8 Right cursor
9 Cursor pad
10 Keystone top
11 Keystone bottom
12 Mute
13 Right mouse
14 Left mouse
15 Volume down
16 Volume up
17 Down cursor
18 Left cursor
19 Menu
20 Freeze
21 Source
22 Power

Inserting the remote control batteries

When using the remote control for the first time, install the batteries that were supplied. Follow the steps
below for inserting new batteries into your remote control.
1. Remove the battery compartment cover by sliding the cover in the direction of the arrow, as shown.
2. Insert the supplied batteries taking note of the polarity (+/-), as shown.
4-2
Lenovo C500 Projector User's Guide
Downloaded From projector-manual.com Lenovo Manuals
Changes OSD settings
Navigates and changes OSD settings. Up arrow when connected through USB
to a PC and when OSD is off.
Navigates and changes OSD settings. Right arrow when connected through
USB to a PC and when OSD is off.
Moves the on-screen cursor (when connected through USB to a PC)
Corrects image trapezoid effect (wider top)
Corrects image trapezoid effect (wider bottom)
Silences the built-in speaker
Right mouse button (when connected through USB to a PC)
Left mouse button (when connected through USB to a PC)
Turns down the volume
Turns up the volume
Navigates and changes OSD settings. Down arrow when connected through
USB to a PC and when OSD is off.
Navigates and changes OSD settings. Left arrow when connected through USB
to a PC and when OSD is off.
Opens and navigates the OSD
Pauses the picture
Detects/switches input device
Turns projector on or off