Table of Contents
Advertisement
5.1.4.
USER INTERFACE (UI) status
Pressing key
is possible to switch between these configuration (rolling):
STATUS
DISPLAY SHOWS
STAND-BY
Display OFF
CLOCK
D1 shows the clock
D1 Clock - D2 OFF
Oven lamp ON
ON
If within 20sec any coo king function
or minute minder is selected, the UI
comes
CLOCK status.
5.1.5.
Setup menu
This menu allow to set three possible oven configurations. Is possible to enter in this menu as follows:
STATUS
DISPLAY SHOWS
D1 shows the clock
ON
D2 is OFF
SETUP MENU
D1 shows " L "
Child lock
D2 shows " OFF "
SETUP MENU
D1 shows " d "
Show Room
D2 shows " OFF "
SETUP MENU
D1 shows " HI "
Power config
D2 shows " PO "
Child lock: The program makes it possible to set the automatic control block for the oven 1 minute after using one of the controls.
Show Room: The program enables all the functions foreseen by the user interface but all the loads (heating elements and motors)
are always OFF.
Power configuration: heating elements are activated always in alternated way (never two elements together)
KEYS USE
back (a utomatically)
to
KEYS USE
the uP maintains the clock updated
Set the clock (see §3)
Set the UI in available different status
Select function.
Set a minute minder (see §7)
Enter the "Setup menu"
Set the UI to STAND-BY status
Keep pressed for 5sec to enter in the Setup Menu
Switch between ON-OFF condition shown on D2
Save configuration and exit from Setup Menu
Go to set the Show Room parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
Switch between ON-OFF condition shown on D2
Save configuration and exit from Setup Menu
Go to set the Show Power parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
Switch between HI-LO condition shown on D1
Save configuration and exit from Setup Menu
Go to set the Show Room parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
8
Advertisement
Table of Contents
