Table of Contents
Advertisement
8.13. SAFETY THERMAL CUT-OUT
AND DOOR LOCK THERMO-
STAT
Access from the back of the oven: disconnect the wiring,
remove the screws shown in the picture using a Phillips
screwdriver.
Use the same procedure to remove door-lock thermostat.
8.14. THERMINAL BLOCK
1. Access from the back of the oven: disconnect the wiring,
remove the screws shown in the picture using a Phillips
screwdriver.
2. To remove the supply cord: loosen with a Phillips
screwdriver
(1) the screws on the wire terminals and
(2) the cord clamp screw
23
Advertisement
Table of Contents
