Rf Repeater Menu > [1] Add Repeater; Rf Repeater Menu > [2] Replace Repeater - Bosch B9512G Installation And System Reference Manual

Control Panels
20.2.4 [2] RF Repeater Menu > [1] Add Repeater
In this menu, you can add Repeater points.
Add Repeater
B91x/B92x keypads configuration of Add Repeater
1.
2.
3.
4.
5.
6.
B93x/B94x keypads configuration of Add Repeater
1.
2.
3.
4.
5.
6.
20.2.5 [2] RF Repeater Menu > [2] Replace Repeater
In this menu, you can replace Repeater points.
Replace Repeater
B91x/B92x keypads use of Replace Repeater
1.
2.
3.
4.
5.
6.
B93x/B94x keypads use of Replace Repeater
1.
2.
3.
4.
Bosch Security Systems, Inc.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [2] Wireless > [2] RF Repeater Menu > [1] Add Repeater. The keypad lists any
repeaters.
Use [PREV] or [NEXT] to scroll though the list, and go to the repeater number for which
you want to add a repeater, or simply enter the repeater number.
Press [ENTER] to add the device. The keypad instructs you to reset the device.
Initiate discovery on a RADION device per the device instructions, or press the RESET
button on an Inovonics device.
When the keypad shows Repeater Added, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [2] Program > [2] RF Repeater Menu > [1] Add Repeater. The keypad lists any
repeaters.
Use /[PREV] or /[NEXT] to scroll though the list, and go to the repeater number for
which you want to add a repeater, or simply enter the repeater number.
Press [ENTER] to add the device to the number. The keypad instructs you to reset the
device.
Initiate discovery on a RADION device per the device instructions, or press the RESET
button on an Inovonics device.
When the keypad shows Repeater Added, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [2] Wireless > [2] RF Repeater Menu > [2] Replace Repeater. The keypad lists any
existing repeaters.
Use [PREV] or [NEXT] to scroll though the list of repeaters, and go to the repeater you
want to replace, or simply enter the repeater number.
Press [ENTER] to replace the device. The keypad instructs you to reset the new device.
Initiate discovery on a RADION device per the device instructions, or press the RESET
button on an Inovonics device.
When the keypad shows Repeater Replaced, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [2] Program > [2] RF Repeater Menu > [2] Replace Repeater. The keypad lists any
existing repeaters.
Use /[PREV] or /[NEXT] to scroll though the list of repeaters, and go to the repeater
you want to replace, or simply enter the repeater number.
Press [ENTER] to replace the device. The keypad instructs you to reset the new device.
Installation and System Reference Guide
Keypad Installer menu | en 155
2016.06 | 08 | F.01U.303.996