Correct Installation Of The Infant Car Seat - CYBEX Cloud Q Instruction Manual

m
m
q

CORRECT INSTALLATION OF THE INFANT CAR SEAT

To ensure your baby's safety, check that:
• the infant car seat is secured with the child facing
the rear of the car (the child's feet point towards the
backrest of the vehicle seat)
• the infant car seat is only used on the front passenger
seat if there is no front airbag that can impact on the
infant car seat.
• the CYBEX CLOUD Q is fastened with a three-point
automatic infant car seat belt
• lap belt (k) runs through the two blue belt guides (m) on
both sides of the infant car seat
• diagonal belt (l) runs through blue belt guide (n) on the
backrest of the infant car seat
• car seatbelt buckle (q) is not touching blue belt guide
(m)
• the car seatbelt is taut and not twisted
• the infant car seat is leveled (see marking) in the
vehicle and in the sitting position with the belt guide
unlocked
• the L.S.P. has been unfolded as far as possible on the
side nearest to the car door, in order to achieve the best
possible protective effect.
NOTE! The infant car seat may only be used on a front-
facing seat that has been fitted with a three-point safety
belt and is approved under ECE R16.
17