Listen To Fm Radio - Philips AT10 User Manual

Store FM radio stations automatically
Note
•
You can store a maximum of 20 preset radio stations.
In FM tuner mode, press and hold
seconds.
» All available radio stations are stored
automatically, then the first stored
radio station is broadcast.
Tip
•
You can press /
Store FM radio stations manually
(only applicable to products with the
last 10 digits of the serial number
beyond 1633077076)
Note
•
You can store a maximum of 20 FM radio stations.
1
In FM tuner mode, tune to an FM radio
station.
2
Press MODE to activate programming
mode.
» The preset number begins to blink.
3
Press repeatedly to select a number.
4
Press MODE again to confirm.
5
Repeat steps 1 to 4 to store other stations.
Note
•
To remove a pre-stored station, store another station
in its place.
for two
to stop auto scan.
Select a preset radio station
In tuner mode, press
preset station.
Play from an external device
With this product, you can listen to an external
audio device such as an MP3 player.
1
Press SOURCE repeatedly to select AUX
source.
2
Connect an audio input cable with a
3.5 mm connector on both ends to
• the AUDIO IN socket on the product.
• the headphone socket on an external
device.
3
Play audio on the device (refer to its user
manual).
Adjust volume
During play, press -/+ to increase or decrease
volume.
Tip
•
You can press and hold -/+ for 2 seconds to increase or
decrease volume continuously.
repeatedly to select a
EN 9