Contents 1 Important 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Attach the string Charge the built-in battery Turn on/off 4 Play from Bluetooth devices Connect a device Disconnect a device Reconnect a device Connect another device 5 Play from external devices 6 Product information...
1 Important Warning • Never remove the casing of this product. • Never place this product on other electrical equipment. • Keep this product away from direct sunlight, naked flames or heat. • Read these instructions. • Heed all warnings. •...
2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external devices.
Overview of the speaker d AUDIO IN • • Press and hold for two seconds Connect an external audio to enter Bluetooth pairing mode. device. • Press and hold for two seconds e DC IN to disconnect Bluetooth • Recharge the built-in battery. connection.
3 Get started Connect the USB cable between • the DC IN socket on the speaker, • a USB socket on a computer. Always follow the instructions in this chapter in sequence. Attach the string For easy carrying, attach the supplied string to this speaker as illustrated.
The fifth paired device the user manual of the device). will replace the first one. • Select [Philips BT110] displayed Any obstacle between this speaker and a Bluetooth device can reduce the on your device for pairing and operational range.
Bluetooth device to the speaker. When you turn on the speaker, it will reconnect the last connected device automatically; • If not, select [Philips BT110] on your Bluetooth menu to start • You can use your Bluetooth device to reconnection.
Play from external devices With this speaker, you can also listen to an external audio device such as an MP3 player. Note • Make sure that music playback through Bluetooth is stopped. Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to •...
6 Product General information information DC Power (Supply 5 V, 1 A Input) Built-in Battery 3.7 V, 800 mAh Note Dimensions - Main 98 x 77 x 35 Unit (W x H x D) • Product information is subject to change Weight - Main Unit 0.15 kg without prior notice.
Never remove the casing of this device. product or remove any obstacle between them. To keep the warranty valid, never try to Fail to find [Philips BT110] on your repair the system yourself. device for pairing. If you encounter problems when using •...
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips Hereby, Gibson Innovations declares service centre to have a professional that this product is in compliance with remove the rechargeable battery.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
Need help?
Do you have a question about the BT110 and is the answer not in the manual?
Questions and answers