Dismounting Bevel Pinion - Iveco daily euro 4 Repair Manual

24
REAR AXLE NDA RS

Dismounting bevel pinion

Figure 26
Lift denting (1) checking nut (2).
Using tool 99370317, stop the rotation of flange (3).
Unscrew and remove nut (2).
Figure 27
Take flange (1) out of bevel pinion (2).
Should flange (2) be too difficult to remove, single-acting rear
axle 99341003 coupled to bracket pair 99341009 can be
used as an extracting assembly.
Figure 28
Using a proper beater, beat according to direction indicated
by the arrow until bevel pinion (1) complete with rear
bearing, fixed spacer and adjusting nut is ejected from rear
axle box (2).
Base - March 2006
Figure 29
Remove the seal (1) and the internal ring (2) of the front
108047
bearing.
Figure 30
108048
Use a punch to remove the external rings (3 - 4) of the
tapered roller bearings from the axle housing (1) and take out
the adjustment shim (2).
Figure 31
108049
With axle 99341003 (2), brackets 99341011 (1), press
99341015 (5) extract the internal ring (3) on the bevel pinion
(4).
D E 4
AILY URO
108050
107839
74727
Print 603.93.651