Table of Contents
Advertisement
9. Close the output tray, front cover, and rear paper feed slot. Then lower the control panel.
10. Unhook the ink tank unit and lay it down, then check to make sure that the ink tank caps are installed
securely.
11. Hook the ink tank unit on the product.
12. Place the product in its original packing materials to prevent the ink tank from being unhooked, if
possible, or use equivalent materials with cushioning around the product.
Keep the product level during transportation. Be sure to remove the tape from the print head holder
before turning on your product. If print quality has declined when you print again, clean and align the
print head.
Parent topic:
Cleaning and Transporting Your Product
196
Advertisement
Table of Contents
