Table of Contents
Advertisement
4.
Wireless Connection Setup
4.1. Setting Up a Wireless Connection Using the
WPS Button
Push the WPS button once, to quickly set up a wireless connection between the HA35 and
any WPS-capable device.
Before you set up a wireless connection using the WPS button, verify the following:
The wireless network security mode of the HA35 is WPA2-PSK or WPA-PSK/WPA2–
PSK.
The wireless device (laptop, tablet, or mobile phone) to connect to the HA35 is WPS-
capable.
1.
Press the WPS button on the wireless device to start the WPS negotiation. For details,
see the user guide for the wireless device.
2.
Within 2 minutes, press and hold the WPS button on the HA35 for 1 second or more.
When the WPS indicator of the HA35 is on and then off, a connection between the HA35
and wireless device has been set up.
Version 2.1 (May 2016)
Picture 3-26 network status
33
- Quick Links:
- Supported Features
- Ports and Buttons
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the HA35 and is the answer not in the manual?
Questions and answers
ruter nie działa karta sim włożona brak dostępu do internetu pokazuje mi ze trzeba autoryzacie zrobic niewiem jak
To authorize a SIM card for internet access on a Huawei HA35 router, follow these steps:
1. Insert a SIM card into the HA35's SIM card slot.
2. Log in to the web management page.
3. Choose the Internet tab and click Internet Settings.
4. Scroll down to find the INTERNET_R_UMTS1 usage scenario.
If the SIM card does not require a PIN for internet access, no additional steps are needed.
This answer is automatically generated
ruter działa a pokazuje brak internetuz
The Huawei HA35 router may show no internet connection even though it is working due to several possible reasons:
1. SIM Card Issues – The SIM card may be faulty, locked, or unavailable. If the MODE indicator is blinking red, it indicates a SIM card issue.
2. Network Registration Problem – Even if the router detects a signal, it may not be correctly registered to the LTE or WCDMA network.
3. Proxy Server Misconfiguration – Incorrect proxy settings in the browser can prevent internet access. Ensure that no proxy server is enabled in the LAN settings.
4. Network Provider Restrictions – The inserted SIM card may not be supported, or the network provider may have restrictions preventing access.
5. Physical Connectivity Issues – Loose or improperly connected cables can affect network stability.
If the issue persists, contact the network service provider for further troubleshooting.
This answer is automatically generated
Нет доступа в Интернет, как настроить. По руководству не получается
To configure Internet access for the Huawei HA35:
1. Log in to the web management page.
2. Find the INTERNET_R_UMTS1 usage scenario and click Edit.
3. Enter the PIN provided by your SIM card operator in the PIN text box and click Save.
4. Check the Internet indicator light. When it turns steady green, the Internet is connected.
If using PPP dial-up software:
1. Ensure the network adapter driver is correctly installed (no ? or ! on the icon).
2. Confirm PPP dial-up software is installed and parameters are set correctly.
3. Enter the correct username and password from your network service provider.
4. Try to connect using the PPP software.
5. If it fails:
- Close the software, power off the HA35 for 5 minutes, then try again.
- Restore HA35 to default settings if needed.
Also, check that the browser proxy settings are correctly configured.
This answer is automatically generated
jak przełączyc antene wewnęczną na zewnęczną