Functions Of Buttons - Sanyo ASW-90WRT Instruction Manual

FUNCTIONS OF BUTTONS

Selection of water level
To set water level according to the
quantity of clothes. Each press, the
water level indicator light moves in
turn.
Child Lock & Tub Clean
Please read " Additional explanation ".
FUNCTION
Press the button to set the single "SOAK" , "WASH" ,
"RINSE" or "SPIN" function.
Program setting
Press the button to select the "Normal"(light)/"Heavy" (flashing),
"Quick"(light)/"Wool" (flashing), "Delicate"(light)/ "Anti-
wrinkle"(flashing) program. Each press, the indicator lights move in
turn to select program. The total time for the program will be shown
in indicator.
There is no further notice for slight change of the above picture.
TEMPERATURE
Press the button to set the wash temperature inlet
HOT or COLD water for wash. When the lights of
HOT and COLD are light at the same time, the
HOT water and COLD water are injecting.
Press the button you can select HOT, COLD and
WARM water to be used.
6
Delay
Power switch
Press the button to set up delay
time of washing. Each press the
The power socket is plugged in, press the button,
button accompanys a change of the washer enters to working state and
an hour in indicator.
automatically set up for standard program.
In the course of working, press the button to end
current program, the washer will stopping.
In order to protect controller, the interval of power on and off
should be more than 30 seconds.
Start / Pause
After program selection, press the button
to start. The flashing light indicates the
selected programs and the current state.
Press the button again for pause. The
program continues at another press till
the program is finished.
7