Start-In-Gear Protection; Engine Oil Requirements - Yamaha F15 Owner's Manual

Hide thumbs Also See for F15:
Table of Contents

Advertisement

portant purchasing decisions a boater can
make. The type, size, and design of your pro-
peller have a direct impact on acceleration,
top speed, fuel economy, and even engine
life. Yamaha designs and manufactures pro-
pellers for every Yamaha outboard motor
and every application.
Your outboard motor came with a Yamaha
propeller selected to perform well over a
range of applications, but there may be uses
where a different propeller would be more
appropriate.
Your Yamaha dealer can help you select the
right propeller for your boating needs. Select
a propeller that will allow the engine to reach
the middle or upper half of the operating
range at full throttle with the maximum boat-
load. Generally, select a larger pitch propel-
ler for a smaller operating load and a smaller
pitch propeller for a heavier load. If you carry
loads that vary widely, select the propeller
that lets the engine run in the proper range
for your maximum load but remember that
you may need to reduce your throttle setting
to stay within the recommended engine
speed range when carrying lighter loads.
To check the propeller, see page 80.
1. Propeller diameter in inches
2. Propeller pitch in inches
3. Type of propeller (propeller mark)
Specifications and requirements
x
-
1
2 3
ZMU04605
EMU25770

Start-in-gear protection

Yamaha outboard motors or Yamaha-ap-
proved remote control units are equipped
with start-in-gear protection device(s). This
feature permits the engine to be started only
when it is in neutral. Always select neutral
before starting the engine.
EMU41952

Engine oil requirements

Select an oil grade according to the average
temperatures in the area where the outboard
motor will be used.
Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke out-
board motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Recommended engine oil grade 2:
SAE 15W-40/20W-40/20W-50
API SH/SJ/SL
Engine oil quantity (without oil filter re-
placement):
1.6 L (1.69 US qt, 1.41 Imp.qt)
Engine oil quantity (with oil filter replace-
ment):
1.8 L (1.90 US qt, 1.58 Imp.qt)
If oil grades listed under Recommended en-
gine oil grade 1 are not available, select an
alternative oil grade listed under Recom-
mended engine oil grade 2.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F20

Table of Contents