Yamaha FJR1300AS Owner's Manual page 60

INSTRUMENT AND CONTROL FUNCTIONS
GEAR
N
STD
0
3
1. Function display
2. Damping force adjusting function
3. Use the select switch to select
"HARD", "STD" or "SOFT".
GEAR
N
HARD
0
1. Damping force setting
4. Push the menu switch "MENU".
5. Use the select switch to select the
desired level for the damping force
setting.
1
GEAR
N
2
HARD
1. Damping force setting level
TIP
The damping force setting can be set to
7 levels (+3, +2, +1, 0, –1, –2 and –3).
"+3" is the hardest level and "–3" is the
softest level.
6. Push the menu switch "MENU".
1
If the vehicle moves while you are ad-
justing the damping force, the informa-
tion display will change to the display
mode.
+3
1
1. Damping force adjusting function
2. Damping force setting
3. Preload setting pictogram
The rear shock absorber assembly
contains highly pressurized nitro-
gen gas. Read and understand the
following information before han-
dling the shock absorber assembly.
3-45
GEAR GEAR
N 1
HARD
HARD
+3
+3
WARNING
● Do not tamper with or attempt to
open the cylinder assembly.
●
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
1
2
3
EWA16420