Yamaha FJR1300AS Owner's Manual page 41

position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Start/Engine stop switch "
To crank the engine with the starter, set
this switch to " ", and then push
the " " side of the switch while apply-
ing the front or rear brake. See page
5-1 for starting instructions prior to
starting the engine.
Set this switch to " " to stop the en-
gine in case of an emergency, such as
when the vehicle has overturned or if
the throttle cable is stuck.
The engine trouble warning light and
ABS warning light may come on when
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
INSTRUMENT AND CONTROL FUNCTIONS
Hazard switch "
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
EAU12500
turn signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
EAU55370 when your vehicle is stopped where it
/ / "
might be a traffic hazard.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 3-7 for an explanation of the
cruise control system.
EAU42341
Menu switch "MENU"
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function
meter unit.
See "Multi-function meter unit" on page
3-11 for detailed information.
EAU12733
" Select switch "
" posi- This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function
meter unit.
See "Multi-function meter unit" on page
3-11 for detailed information.
Stop mode function switch "
ECA10061
When this switch is pushed, the stop
mode function is activated and the stop
mode function indicator light comes on.
When the stop mode function is activat-
ed, the function works together with the
YCC-S system to automatically shift
EAU12780
down to 1st gear according to the vehi-
cle speed.
If this function is activated and the
transmission is in 2nd gear or higher
when the rider stops the vehicle, the
EAU54230
function will automatically shift down to
1st gear.
3-26
EAU54220
/ "
3
EAU55461
"