Yamaha FJR1300AS Owner's Manual page 58

INSTRUMENT AND CONTROL FUNCTIONS
1
3
1. Menu switch "MENU"
2. Select switch " /
3. Use the select switch to select the
desired preload setting pictogram.
Select the suitable setting from the
following 4 pictograms according
to your load condition.
2
1
3
1. Solo riding
" 2. Solo riding and luggage
3. Passenger riding
4. Passenger riding and luggage
While the preload is being adjust-
ed, the information display will
show a group of dots moving in a
circle. Once the selected picto-
gram returns, the preload adjust-
ment is complete.
GEAR
N
While the preload is being adjusted, the
information display may change as fol-
2
lows.
4
GEAR
N
3-43
● If the key is turned to "OFF" or the
engine is stopped while the pre-
load is being set, the following pre-
load setting pictogram will flash to
alert you that the current preload
setting does not match the picto-
gram. If this occurs, adjust the pre-
load again.
GEAR GEAR
N N
●
If the vehicle starts moving, the fol-
lowing preload setting pictogram
will flash to alert you that the cur-
rent preload setting does not
match the pictogram. If this occurs,
stop the vehicle and adjust the pre-
load again.