Factory Default; Software Version - Miele PG 8591 Operating Instructions Manual

Further settings
84

Factory default

All parameters which have been altered can be reset to their default
settings. Control parameters and programme settings are reset
separately.
Open the menu as follows:

 button
 Further settings
Factory default

Reset

Reset
No
–
Altered parameters are maintained.
Programme settings only
–
All programme settings are reset.
Programmes saved on free memory locations remain unchanged.
– All settings
All control parameters including dispensing quantities and water
hardness will be reset.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

All settings
Selecting
machine restarts, you will be prompted to re-enter basic parameters
such as the language, date, time, water hardness etc.
Enter the language, date, time etc.

Drain
Select the programme and press the Start/Stop button.

Drain
When the programme is finished, all entries are saved and the
factory default settings have been reset.

Software version

You can use this menu to call up the software versions of individual
elements, e.g. when contacting Miele Service.
For more information see "Service".
No
Programme settings only
restarts the washer-disinfector. After the