Sound Pressure Level; Sound Power Level; Vibration Level; Safety And Instruction Decals - Toro 30426 Operator's Manual

• Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be
relieved by stopping the engine and lowering the cutting
units and attachments to the ground.
• If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
• To ensure optimum performance and safety, always
purchase genuine Toro replacement parts and
accessories to keep the machine all Toro. Never use
"will-fit" replacement parts and accessories made by
other manufacturers. Look for the Toro logo to ensure
genuineness. Using unapproved replacement parts and
accessories could void the warranty.

Sound Pressure Level

This unit has an equivalent continuous A-weighted sound
pressure level at the operator ear of 88 dBA based on
measurements of identical machines per Directive
98/37/EC and amendments

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
98-3110
1. Danger–See Operator's
Manual
2. Danger–Wear ear
protection
3. Thrown object
hazard–Keep bystanders
away.
4. Always wear eye
protection
5. Cutting hazard to hands
or feet–wait until all
machine components
have stopped before
touching them.

Sound Power Level

This unit has a guaranteed sound power level of
104 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Vibration Level

Hand–Arm
This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines per
ISO 5349 procedures.
Whole Body
This unit does not exceed a vibration level of .5 m/s
posterior based on measurements of identical machines per
ISO 2631 procedures.
105-4586
1. Entanglement hazard, belt—stay away from moving parts. Do
not operate the machine with the shields or guards removed;
keep the shields and guards in place.
105-4594
1. Crushing hazard, hand and foot—read the Operator's Manual.
4
2
at
2
at the