Table Of Contents; Introduction - Toro 30393 Operator's Manual

Debris blower for groundsmaster 7200/7210 traction unit
Hide thumbs Also See for 30393:
Table of Contents

Advertisement

Introduction

Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your product ready.
Figure 1 identifies the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
© 2007-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Before Operating ................................................. 3
While Operating................................................... 3
Maintenance......................................................... 3
Safety and Instructional Decals ............................. 4
Setup............................................................................ 6
1 Mounting the Castor Wheel ............................... 6
Unit.................................................................. 6
3 Adjusting the Link Assembly.............................. 8
4 Grease the Blower ............................................. 8
5 Install Front Weight ........................................... 8
Operation................................................................... 11
Adjust Discharge Opening.................................. 11
Switch Operation ............................................... 11
Operating Tips ................................................... 11
Maintenance............................................................... 13
Lubrication......................................................... 13
Bearing Alignment.............................................. 13
Torquing Fasteners ............................................. 14
Servicing the Castor Arm Bushings ..................... 14
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved

Advertisement

Table of Contents
loading

Table of Contents