Trouble Shooting Guide; Warranty - DeWalt DW705 Instruction Manual

Trouble Shooting Guide

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
TROUBLE! SAW WILL NOT START
WHAT'S WRONG?
1. Saw not plugged in
2. Fuse blown or circuit breaker tripped
3. Cord damaged
4. Brushes worn out
TROUBLE! SAW MAKES UNSATISFACTORY CUTS
WHAT'S WRONG?
1. Dull blade
2. Blade mounted backwards
3. Gum or pitch on blade
4. Incorrect blade for work being done
TROUBLE! BLADE DOES NOT COME UP TO SPEED
WHAT'S WRONG?
1. Extension cord too light or too long
2. Low house current
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT'S WRONG?
1. Saw not mounted securely to stand or work bench
2. Stand or bench on uneven floor
3. Damaged saw blade
TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS
WHAT'S WRONG?
1. Miter scale not adjusted correctly
2. Blade is not square to fence
3. Blade is not perpendicular to table
4. Workpiece moving
TROUBLE! MATERIAL PINCHES BLADE
WHAT'S WRONG?
1. Cutting bowed material
WHAT TO DO...
1. Plug in saw.
2. Replace fuse or reset circuit breaker
3. Have cord replaced by authorized service center
4. Have brushes replaced by authorized service
center or replace them yourself as instructed on page 10.
WHAT TO DO...
1. Replace blade. See page 7.
2. Turn blade around. See page 7.
3. Remove blade and clean with turpentine and
coarse steel wool or household oven cleaner.
4. Change the blade. See page 7.
WHAT TO DO...
1. Replace with adequate size cord. See page 4.
2. Contact your electric company
WHAT TO DO...
1. Tighten all mounting hardware. See page 5.
2. Reposition on flat level surface. See page 5.
3. Replace blade. See page 7.
WHAT TO DO...
1. Check and adjust. See page 8.
2. Check and adjust. See page 8.
3. Check and adjust fence. See page 8.
4. Clamp workpiece to fence or glue 120 grit
sandpaper to fence with rubber cement.
WHAT TO DO...
1. Position bowed material as shown on page 14.
16
Important
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by
Black & Decker (U.S.) Inc. industrial tool service centers or
other qualified service organizations. These service
organizations service D WALT tools always using
E
D WALT replacement parts.
E
Full Warranty
D WALT heavy duty Industrial tools are warranted for one
E
year from date of purchase. We will repair, without charge,
any defects due to faulty materials or workmanship.
Arrangements have been made with the Industrial Tool
Division of Black & Decker (U.S.) Inc. to provide warranty
repairs for D WALT tools. Please return the complete unit,
E
transportation prepaid, to any Black & Decker (U.S.) Inc.
industrial service center or authorized service station listed
under "Tools, Electric" in the yellow pages. This warranty
does not apply to accessories or damage caused where
repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have
other rights which vary from state to state.
In addition to the warranty, D WALT tools are covered by
E
our:
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of
your D WALT heavy duty Industrial tool, simply return it to
E
the participating seller within 30 days for a full refund.
Please return the complete unit, transportation prepaid.
Proof of purchase may be required.
See 'Tools-Electric'
–Yellow Pages–
for Service & Sales