Preparation Of Ingredients; How To Use - Panasonic MK-F500 Operating Instructions Manual

FOOD PROCESSOR
How to Use : Knife Blade • Kneading Blade • Whipping Blade • Grating Blade
1
Place the Knife Blade (Kneading Blade or Whipping
Blade or Grating Blade) into the Bowl.
Note:
For the Knife Blade, ensure that the
Drive Shaft is protruding from the Knife
Blade after insertion.
3
Plug-in the plug into the socket and turn the Rotary
Switch to select the speed required (refer to
"Preparation of Ingredients" at page 9-10).
Note:
• Always ensure that the Knife Blade is inserted before adding ingredients into the Bowl.
• Do not exceed the stated amount of ingredients for kneading as abnormal vibration may occur.
• Do not insert hot ingredients into the Bowl for processing. Always ensure that the ingredients are sufficiently
cooled before inserting, i.e. boiled potato.
• For Juice Make, fill in the solid ingredients first into the Bowl, followed by the liquid ingredients until the total
volume does not exceed 1,500 mL.
• When process the liquid ingredients together with ice cubes, put the ice cubes not more than 10 pcs (approx.
170 g).
• Do not exceed the stated amount of ingredients for the Kneading Blade as abnormal vibration may occur.
• Do not over process the whipping cream, it may break down to form clumps of butter.
• Using different brands of whipping cream will have varying results. It is recommended to process until the
cream is sufficiently whipped.
• Depending on the speed and amount of ingredients used, there will be significant vibrations present. In that
case, hold down the Bowl Lid with both hands to support it during its operation.
• For kneading, do not reprocess after the dough has formed the first time.
- KNIFE BLADE • KNEADING BLADE
• WHIPPING BLADE • GRATING BLADE-
or
or
or
1
2
11
2
1
Put the ingredients into the Bowl. Place the Bowl Lid on
top of the Bowl and turn it clockwise until a 'click' sound
is heard. Insert the Food Pusher into the Feeding Tube.
Attach the Bowl assembly onto the Motor Housing as
seen in page 9.
Note:
For the Grating Blade, place the ingredients on top of
the blade itself.
4
1
After the processing is completed, return the Rotary
Switch to OFF position "0" and unplug from the socket.
Remove the Knife Blade from the Bowl before removing
the processed ingredients.
4
3
2
3
2