Preparation; Dashboard Installation; Installation Hardware - Panasonic CQ-BT5107U Operating Instructions Manual

Mp3 cd player/weather band receiver with built-in bluetooth
Table of Contents

Advertisement

Preparation

Warning
If your vehicle is equipped with air bag and/or anti-theft
systems, specific procedures may be required for con-
nection and disconnection of the battery to install this
product.
Before attempting installation of this electronic compo-
nent, contact your vehicle dealer or manufacturer to de-
termine the required procedure and strictly follow their
instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT
IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR
ACTIVATION OF THE ANTI-THEFT SYSTEM RESULT-
ING IN DAMAGE TO THE VEHICLE AND PERSONAL IN-
JURY OR DEATH.
• Disconnect the cable from the negative @ battery terminal
(see caution below).
• Remove Mounting Collar q from the main unit temporar-
ily, which are already mounted at shipment.*
Caution
Various settings that have been stored in the memory
in other on-board equipment (vehicle navigation etc.)
may be lost if the battery terminals are disconnected.
Therefore, we recommend to make a record of or to
back up the settings before disconnecting the termi-
nals.
After completing installation of the main unit, set the
equipment again according to the record.
• Unit should be installed in a horizontal position with the
front end up at a convenient angle, but not more than 30˚.

Dashboard installation

Installation Opening
This unit can be installed in any dashboard having an open-
ing as shown below. The dashboard should be 4.75 mm
{3/16"} – 5.56 mm {7/32"} thick in order to be able to sup-
port the unit.
182 mm
5
{7-
/
"}
32

Installation hardware

No.
q
w
e
r
t
y
u
i
o
!0
(a) Using the rear support strap t
(b) Using the rubber cushion (option)
53 mm
3
{2-
/
"}
32
Item
Mounting Collar*
Plain Washer (5 mm ø)
Spring Washer (5 mm ø)
Hex. Nut (5 mm ø)
Rear Support Strap
Hex. Bolt
(5 mm ø × 25 mm)
Toothed Lock Washer
(5 mm ø)
Removal Tool
(U-shaped)
Microphone with Bracket
Adhesive Sponge
Rear support bracket
Rubber cushion (option)
(provided on the vehicle)
Mounting bolt
(5 mm ø)
q Mounting Collar
Diagram
Q'ty
1
2
2
2
1
1
1
2
1
1
33
CQ-BT5107U

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents