Water inlet fault
Problem
The dishwasher stop‐
ped working shortly af‐
ter the programme star‐
ted.
The buzzer is sounding.
The / indicator
light is flashing on and
off.
The dishwasher has
stopped during a pro‐
gramme.
The buzzer is sounding.
Fault code or has
appeared in the display.
Possible cause and remedy
The tap is turned off.
Turn on the tap fully.
Before rectifying the problem, you must:
Switch the dishwasher off with the button.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
Problem solving guide
75