Optimise Standby - Miele G 4960 Operating Instructions Manual

Programme options

Optimise standby

"Optimise standby" is activated by de‐
fault.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
"Optimise standby" can be switched off
if you prefer. If you do this, the duration
before the dishwasher switches off in‐
creases to 6 hours. Doing this will in‐
crease energy consumption.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in and, whilst holding it in, switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
62
 Press the  button 8 times.
The  indicator light will flash rapidly 8
times at intervals.
The flashing sequence in the display
shows whether "Optimise standby" is
activated or not.
–  : "Optimise standby" is switched
on.
–  : "Optimise standby" is switched
off.
 Press the programme selector button
 if you wish to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.