Safety And Instructional Decals - Toro 51888 Operator's Manual

48v chain saw
Table of Contents

Advertisement

E. Do not dispose of the battery in a fire. The cell may
explode. Check with local codes for possible special
disposal instructions.
F. Do not open or mutilate the battery. Released electrolyte
is corrosive and may cause damage to the eyes or skin.
It may be toxic if swallowed.
G. Do not open or mutilate the battery. Released electrolyte
is flammable and can cause damage if exposed to fire.
H. Exercise care in handling batteries in order not to short
the battery with conducting materials such as rings,

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
1. Overheating/high amp
indicator
2. Hand guard
backward—motor run
1. Read the Operator's Manual—contact of the guide bar tip
with any object should be avoided; tip contact can cause
the guide bar to move suddenly upward and backward,
which can cause serious injury; always use two hands
when operating the chain saw.
121-7647
3. Hand guard
forward—motor stop
4. Warning—read the
Operator's Manual
121-7652
bracelets, and keys. The battery or conductor may
overheat and cause burns.
I. Ideal charging temperature is between 0 degrees C and
50 degrees C (32 and 122 degrees F). Charging outside
of this temperature range will increase the charging
time.
WARNING—To reduce the risk of injury, user must read instruction
manual.
SAVE THESE INSTRUCTIONS
1. Wear ear protection; wear eye protection; do not operate in
wet conditions; contact of the guide bar tip with any object
should be avoided; tip contact can cause the guide bar to
move suddenly upward and backward, which can cause
serious injury; always use two hands when operating the
chain saw.
3
121-7644

Advertisement

Table of Contents
loading

This manual is also suitable for:

5188951889t

Table of Contents