Maintenance And Storage - Toro 74919TE Operator's Manual

•
Disengage the attachment drives, stop the engine, and
disconnect the spark-plug wire(s) or remove the ignition
key
– Before clearing blockages or unclogging the chute;
– Before checking, cleaning, or working on the machine;
– After striking a foreign object. Inspect the machine
for damage and make repairs before restarting and
operating the equipment;
– If the machine starts to vibrate abnormally (check
immediately).
•
Disengage drive to attachments when transporting or not
in use.
•
Stop the engine and disengage the attachment drives
– Before fuelling;
– Before removing the grass catcher;
– Before making height adjustment unless adjustment
can be made from the operator's position.
•
Reduce the throttle setting during engine run-out and, if
the engine is provided with a shutoff valve, turn the fuel
off at the conclusion of mowing.
Rollover Protection System
(ROPS)—Use and Maintenance
•
The ROPS is an integral and effective safety device. Keep
a folding ROPS in the raised and locked position and use
the seat belt when operating the machine.
•
Lower a folding ROPS temporarily only when absolutely
necessary. Do not wear the seat belt when folded down.
•
Be aware there is no rollover protection when a folded
ROPS is in the down position.
•
Be certain that the seat belt can be released quickly in
the event of an emergency.
•
Check the area to be mowed and never fold down a
folding ROPS in areas where there are slopes, drop offs
or water.
•
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before driving under any
objects and do not contact them.
•
Keep the ROPS in safe operating condition by
periodically thoroughly inspecting for damage and
keeping all mounting fasteners tight.
•
Replace a damaged ROPS. Do not repair or revise.
•
Do not remove the ROPS.
•
Any alterations to a ROPS must be approved by the
manufacturer.
Safe Handling of Fuels
•
To avoid personal injury or property damage, use
extreme care in handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other sources
of ignition.
•
Use only an approved fuel container.
•
Never remove fuel cap or add fuel with the engine
running.
•
Allow engine to cool before refueling.
•
Never refuel the machine indoors.
•
Never store the machine or fuel container where there is
an open flame, spark, or pilot light such as on a water
heater or on other appliances.
•
Never fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers on
the ground away from your vehicle before filling.
•
Remove equipment from the truck or trailer and refuel it
on the ground. If this is not possible, then refuel such
equipment with a portable container, rather than from a
fuel dispenser nozzle.
•
Keep the nozzle in contact with the rim of the fuel tank
or container opening at all times until fueling is complete.
•
Do not use a nozzle lock open device.
•
If fuel is spilled on clothing, change clothing immediately.
•
Never overfill fuel tank. Replace fuel cap and tighten
securely.

Maintenance and Storage

•
Keep all nuts, bolts, and screws tight to be sure that the
equipment is in safe working condition.
•
Never store the equipment with fuel in the tank inside a
building where fumes can reach an open flame or spark.
•
Allow the engine to cool before storing the machine in
any enclosure.
•
To reduce the fire hazard, keep the engine, silencer,
battery compartment, and fuel-storage area free of grass,
leaves, or excessive grease.
•
Check the grass catcher frequently for wear or
deterioration.
•
Replace worn or damaged parts for safety.
•
If the fuel tank has to be drained, this should be done
outdoors.
•
On multi-bladed machines, take care, as rotating one
blade can cause other blades to rotate.
•
When machine is to be parked, stored, or left unattended,
lower the cutting means unless a positive mechanical lock
is used.
•
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro delivers
replacement parts designed to the exact engineering
5