Rollover Protection
System Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Visually inspect seat belt for wear, cuts, and proper operation
of retractor and buckle. If it is seat belt is damaged, replace it
before operating the machine.
Checking the Rollover
Protection System (ROPS)
Knobs
Service Interval: Before each use or daily
Check that both the mounting hardware and the knobs are
in good working condition. Make sure the knobs are fully
engaged with the ROPS in the fully raised position. The
upper hoop of the roll bar may need to be pushed forward or
pulled rearward to get both knobs fully engaged.
1. ROPS knob (locked
position)
2. Pull the ROPS knob out
and rotate it 90 degrees
to change the roll bar
position.
62
Figure 105
3. Roll bar in the upright
position
4. Roll bar in the folded
position