Changing The Engine Oil Filter - Toro 74923TE Operator's Manual

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure 53).
1
3
5
G0201 17
6. Start the engine and drive to a flat area. Check the oil
level again.

Changing the Engine Oil Filter

Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Changing the Engine Oil (page 37).
2. Change the engine oil filter (Figure 54).
2
4
6
Figure 53
1
3
5
G0201 18
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Engine Oil (page 37).
38
2
4
6
3/4
Figure 54
G008804