Toro 30534 Operator's Manual page 26

2. Move the throttle lever to the Slow position, stop the
engine, remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Raise the front of the machine and support it on jack
stands.
4. Remove the fasteners securing each roller on your
mower deck and move the rollers up or down as
desired; refer to Figure 20 through Figure 24 as
applicable for your mower.
Figure 20
All Mower Decks
1. Front roller
Figure 21
Guardian Mower Decks Only
1. Bolt
2. Rear under-deck roller
3. Spacer
2. Roller shaft
4. Nut
5. Bracket
Guardian Mower Decks Only
1. Bolt
2. Front under-deck roller
Side-discharge Mower Decks Only
1. Bolt
2. Chute-side roller
3. Spacer
26
Figure 22
3. Nut
4. Bracket
Figure 23
4. Nut
5. Bracket