Operating The Power Take Off (Pto); Stopping The Engine - Toro 74179 Operator's Manual

2
1
m–4201
Figure 13
1. PTO—On
2. PTO—Off
1
2
m–2720
Figure 15
1. Fast
2. Slow

Stopping the Engine

1. Push the PTO to off (Fig. 15).
2. Move the throttle lever midway between the slow and
fast positions (Fig. 15).
3. Let the engine idle for 60 seconds (Fig. 16).
4. Turn the ignition key to off (Fig. 16).
5. Pull wire off spark plug(s) to prevent possibility of
someone accidentally starting the machine before
transporting or storing machine.
6. Close fuel shut off valve, on front panel before
transporting or storing machine.
Important
before transporting or storing machine, as fuel leakage may
occur. Set parking brake before transporting.
Operating the Power Take Off
2
(PTO)
1
The power take off (PTO) switch engages and disengages
power to the electric clutch.
m–2719
Figure 14 Engaging the PTO
1. Choke—On
1. While seated in the seat, release the pressure on the
2. Choke—Off
2. Place the throttle in the fast position.
3. Pull out on the power take off (PTO) switch to engage
1
2
3
M–4268
Figure 16
1. Off
2. Run
3. Start
1. PTO—Off
Disengaging the PTO
To disengage, push the PTO switch to the Off position
(Fig. 17).
19
Make sure fuel shut off valve is closed
traction control levers and place in neutral.
(Fig. 17).
1
Figure 17
2
m–4201
2. PTO—On