Product Overview; Controls - Toro 30447N Operator's Manual

Product Overview

Controls

Note: Determine the left and right sides of the machine
from the normal operating position.
CAUTION
This machine produces sound levels in excess of 85
dBA at the operators ear and can cause hearing loss
through extended periods of exposure.
Wear hearing protection when operating this
machine.
Traction Pedal
To stop, reduce your foot pressure on the traction pedal and
allow it to return to the center position (Figure 2).
1. Brake pedals
2. Pedal locking latch
3. Space for optional
accessory
4. Space for optional
accessory
5. Parking brake latch
Brake Pedals
Two foot pedals Figure 2 operate individual wheel brakes for
turning assistance, parking, and to aid in obtaining better side
hill traction. A latch connects the pedals for parking brake
operation and transport.
Pedal Locking Latch
The pedal locking latch Figure 2 connects the pedals together
to engage the parking brake.
Figure 2
6. Fuel gauge
7. Hazard light switch (GM
4100 only)
8. Tilt steering lever
9. Traction pedal
Tilt Steering Lever
Press the lever Figure 2 down to tilt the steering wheel to
the desired position. Then release the lever to lock the
adjustment.
Parking Brake Latch
A knob on the left side of the console actuates the parking
brake lock (Figure 2). To engage the parking brake, connect
the pedals with the locking latch, push down on both pedals,
and pull the parking brake latch out. To release the parking
brake, press both pedals until the parking brake latch retracts.
Fuel Gauge
The fuel gauge (Figure 2) indicates the level of fuel in the tank.
Hazard Light Switch (GM 4100 only)
Press the hazard light switch (Figure 2) to activate the hazard
lights.
Speed Limiter
If desired, the screw can be adjusted (Figure 3) to limit the
amount the traction pedal can be depressed in the forward
direction to limit the mowing speed.
1. Speed limiter
Important: When in the mow position, the speed limiter
screw must stop the traction pedal before the pump
reaches full stroke or damage to the pump may occur.
Diagnostic Light
The diagnostic light (Figure 4) will illuminate should a system
fault be recognized.
14
Figure 3