Specifications; Attachments/Accessories - Toro 30412 Groundsmaster 4000-D Operator's Manual

Audible Alarm
The alarm (Figure 4) is activated when the low engine
oil pressure light illuminates or the high coolant
temperature light illuminates.
Alarm Silence Switch
This switch (Figure 4) shuts off the audible alarm.
Throttle Control
Move the control (Figure 4) forward to increase the
engine speed and rearward to decrease the speed.
Power Point
The power point (Figure 4) is used to power optional
electrical accessories.
Engine Cooling Fan Switch
The machine is equipped with a hydraulically driven auto
reversing engine cooling fan. The fan switch (Figure 4)
has three positions R (manual reverse), Auto (normal)
and F (forward only). Refer to Engine Cooling Fan
Operation in the Operation Section of manual
Fan Switch
The fan switch has three positions R (manual reverse),
Auto (normal) and F (forward only).

Specifications

Note: Specifications and design are subject to change
without notice.
Width of cut
overall
front cutting unit
side cutting unit
front and one side cutting unit
Overall width
cutting units down
cutting units up (transports)
Overall length
Height
Height with ROPS
Ground clearance
Wheel tread (to center of tire)
Wheel base
Weight (with cutting units and fluids)

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
132 inch (335 cm)
62 inch (157 cm)
42 inch (107 cm)
97 inch (246 cm)
136 inch (345 cm)
72 inch (183 cm)
135 inch (342 cm)
55 inch (140 cm)
81 inch (206 cm)
6-1/2 inch (17 cm)
17
front
rear
45 inch (114 cm)
47 inch (119 cm)
55-1/2 in (141 cm)
4166 lb (1890 kg)