Toro Powerlite 38273 Operator's Manual

Powerlite
Model No. 38273—Serial No. 312000001 and Up
Model No. 38283—Serial No. 312000001 and Up
Introduction
This machine is intended to be used by residential
homeowners or professional, hired operators. It
is designed primarily for removing snow from
paved surfaces, such as driveways and sidewalks,
and other surfaces for traffic on residential or
commercial properties. It is not designed for
removing materials other than snow, nor is it
designed for clearing off gravel surfaces.
Read this information carefully to learn how to operate
and maintain your machine properly and to avoid injury
and machine damage. You are responsible for operating
the machine properly and safely.
You may contact Toro directly at www.Toro.com for
machine and accessory information, help finding a
dealer, or to register your machine.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your machine ready.
Figure 1 identifies the location of the model and serial
numbers on the machine. Write the numbers in the
space provided.
1. Model and serial number location
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Snowthrower
Figure 1
Register at www.Toro.com.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury
or death if you do not follow the recommended
precautions.
Figure 2
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Safety
This machine meets or exceeds the ISO standard
8437 in effect at the time of production.
Read and understand the contents of this manual
before you start the engine.
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
Improperly using or maintaining this machine
could result in injury or death. To reduce this
potential, comply with the following safety
instructions.
Training
• Read, understand, and follow all instructions on the
machine and in the manual(s) before operating this
machine. Be thoroughly familiar with the controls
Form No. 3369-503 Rev D
Operator's Manual
Original Instructions (EN)
Printed in the USA
All Rights Reserved