Servicing The Headlights - Toro 17-44HXLE Wheel Horse 71283 Operator's Manual

Servicing the Headlights

Specification: Bulb #1156, automotive type
Removing the Bulb
1. Disengage the PTO, set the parking brake, stop the
engine, and remove the ignition key.
2. Open the hood. Pull the wire connectors off of both of
the bulb holder terminals.
3. Rotate the bulb holder 1/4 turn counterclockwise and
remove it from the reflector (Fig. 30).
4. Push and rotate the bulb counterclockwise until it stops
(approx. 1/4 turn) and remove the bulb from the bulb
holder (Fig. 31).
5
3
2
4
Figure 30
1. Bulb holder
2. Reflector
3. Tabs
5
1
4
1874
4. Slots
5. Terminals
28
Installing the Bulb
1. The bulb has metal pins on the side of its base. Align
the pins with the slots in the bulb holder and insert the
base into the holder (Fig. 31). Push and rotate the bulb
clockwise until it stops.
2
4
3
Figure 31
1. Bulb
2. Metal pins
2. Align the two tabs on the bulb holder with the slots in
the reflector (Fig. 30). Insert the bulb holder into the
reflector and rotate it 1/4 turn clockwise until it stops.
3. Push the wire connectors onto the terminals on the bulb
holder.
1
2
4
1875
3. Bulb holder
4. Slots