For assistance: www.samsung.com This manual is made with 100% recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.com/register DD68-00132A-02 DD68-00132A-02_S04_140602_EN.indd 1...
Page 2
Safety instructions Congratulations on your new Samsung dishwasher. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your dishwasher’s many benefits and features.
Page 3
Important safety precautions This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance. As with any equipment using electricity and moving parts, potential hazards exist.
Page 4
Safety instructions INSTRUCTIONS WHEN USING YOUR DISHWASHER This dishwasher is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments such as: • Shops • Offices and showrooms and by residents in establishments such as: • Hostels and guest houses.
Page 5
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given WARNING supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 6
Safety instructions The integrated waterproof system offers protection from water damage, provided the following conditions are met: CAUTION • The dishwasher is correctly installed and plumbed in. • The dishwasher is properly maintained and parts are replaced where it can be seen that this is necessary.
Contents PREPARING THE DISHWASHER ENCLOSURE Product and enclosure dimensions BEFORE INSTALLING YOUR DISHWASHER Checking the parts and tools INSTALLING YOUR DISHWASHER STEP 1. Selecting the best location for the dishwasher STEP 2. Checking water supply and electrical requirements STEP 3. Preparing the custom panel STEP 4.
Preparing the dishwasher enclosure PRODUCT AND ENCLOSURE DIMENSIONS This dishwasher is designed to be enclosed on the top and on both sides by a standard residential kitchen cabinet unit. The installation enclosure must be clean and free of any obstructions. The enclosure must be at least 600 mm wide, 575 mm deep, and 820 mm high.
Before installing your dishwasher CHECKING THE PARTS AND TOOLS Before starting on the installation, prepare all the necessary tools and parts required to install the dishwasher. This will save installation time and simplify the installation process. Parts required Provided with the dishwasher. Check when you unpack your dishwasher. Custom panel xers (2) Installation brackets (2) Protective sticker...
Installing your dishwasher Be sure that you or your installer follow these instructions closely so that your new dishwasher works properly and that you’re not at risk of injury when washing dishes. New installation If the dishwasher is a new installation, most of the installation work must be done before the dishwasher is moved into place.
Installing your dishwasher STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL REQUIREMENTS • The water supply line pressure must be between 0.05 ~ 0.8 MPa. • Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C. CAUTION • Use a rated power of 220 ~ 240 V/50 Hz. • Install the product while the power cord is unplugged.
STEP 3. PREPARING THE CUSTOM PANEL Ø 2 Ø 2 1. Place the supplied installation manual at the back of the custom panel (to be attached to the door of the product) to be installed and temporarily fix it using transparent tape. • The top part of the supplied installation manual and the top part of the custom panel must be aligned.
Installing your dishwasher STEP 4. INSTALLING THE CUSTOM PANEL 1. Install the supplied rubber skirt by inserting it into the 3 holes at the bottom of the door. 2. Install the custom panel prepared in STEP 3 to the door of the product. 1) Push part assembled in STEP 3 into the hole at the top of the door as shown in the figure.
Page 15
3. Cut the rubber skirt installed in the previous step with a cutting knife as shown so that it is aligned with the front of the product. (Represented as a dashed line.) 4. Open the door that has been assembled with the custom panel and remove the 2 screws that you fastened previously.
Installing your dishwasher STEP 5. PREPARING THE DISHWASHER 1. Hook the installation brackets into the holes as shown in the figure above. When you fix the product at the sides instead of fixing it at the top, you do not need to use the installation brackets.
Page 17
3. Prepare the power cord, water supply hose and drain hose. • Take care that you not bend or fold the cord or hose. • Do not connect the power cord until the installation of the dishwasher is complete. CAUTION 4.
Installing your dishwasher STEP 6. LEVELING THE DISHWASHER Min. 4 mm 1. Push half the product into the space under the sink and make sure that the product is level using the leveler. If you put the entire product under the sink, you cannot adjust the legs at both ends of the bottom front of the product.
STEP 7. SECURING THE DISHWASHER A. When the product is fixed to the counter top (when the material of the counter top is ideal for drilling) Ø 2 1. Insert the product into the place under the counter top completely. 2. Pre-drill the overlapping holes of the installation brackets and the protector top with a 2-pi drill bit to a depth of 10~12 mm and then fasten the screws.
Installing your dishwasher B. To fix the product at the sides (when the material of the counter top is not appropriate for drilling) 1. Insert the product under the sink completely. 2. Remove upper and lower caps from both side with a tool such as a flat-head screwdriver as shown in figure.
STEP 8. CONNECTING THE DRAIN HOSE Max. 80 cm Min. 30 cm 1. Remove the hose holder which is attached to the product and cut off part of the holder as shown in the figure. 2. Discard the part you have just cut off and use only the part that is shown by the figure. 3.
Installing your dishwasher STEP 9. COMPLETING THE INSTALLATION 1. Open the door and remove all foam, paper packaging, and unnecessary parts. 2. Turn on the circuit breaker you turned off before you began the installation. 3. Open the water supply valve to supply water to the dishwasher. 4.
Specifications SPECIFICATIONS MODEL DW-BG97 / DW-BG77 / DW-BG58 / DW-BG57 Series Power supply 220 ~ 240 V, 50 Hz AC only Water pressure 0.05 ~ 0.8 MPa Dimensions 598 mm (W) X 817 mm (H) X 555 mm (D) (Width×Height×Depth) Nominal inlet water temperature 15 ˚C (max 60 ˚C) Specifications are subject to change without notice for quality improvement purposes.
Specifications REFERENCE FOR STANDARD NOISE TEST (REFER PAGE 14 AND 22) 1. Cut the RUBBER-SKIRT at the second line from the bottom in step 4. RUBBER-SKIRT cutting line 2. Install the Kick Plate located at * on the table in step 9. RUBBER-SKIRT stay close Cut-away depth P = E 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100...